fem单词基本解析：

n.女子
abbr. 女性（=female, feminine）FEMabbr. 场致发射显微镜(=field emission microscopy)
n.女子；

fem变化用词：

fem英英释义：

FEMFEM refers to a number of things, either as an acronym or otherwise:

以上来源于:Wikipedia

fem中文词源：

fem用法和例句：

fem

Comparison between the results of ESPI and FEM revealed a convincing agreement.

ESPI量测与FEM 分析结果皆显示富有论据证实的一致性。

Template method was used in IVCD system to quickly and easily build vehicle body concept geometry model and FEM model.

IVCD基于车身模板技术，可快速生成车身概念结构几何模型和有限元模型；

Lisa ?t sex glassar och Pelle ?t fem.

Lisa 吃了六根冰淇淋和 Pelle 吃了五根。

Based on FEM, MUFEM combines the main advantages of DDM (Domain Decomposition Method) and DDA (Discontinuous Deformation Analyses).

MUFEM以有限元方法为基础，综合区域分解法（DDM）和非连续体变形分析方法（DDA）的主要优点。

Nastran is used to build planar FEM models to discuss these questions associated with actual measurement data.

Nastran建立二维有限元模型，并结合现场实测数据对地铁计算分析中的若干问题进行研究。

PATRAN and the process in developing load module of airfoil FEM.

PATRAN进行二次开发程序编制的方法,以及开发机翼有限元模型加载模块的过程,为在msc.

The biomechanical effect study of maxillary anchorage molar and its periodentium by FEM.

三维有限元法分析上颌支抗磨牙及其支持组织的生物力学

The computed results was consistent with those of 3D FEM, indicating that the calculation method was reliable.

与有限元解比较，结果表明该换算方法的精度完全能满足工程计算的需要。

This paper attempts to establish the optimal system using FEM software MARC combining with the optimal software IMSL.

中文摘要应用MARC有限元素分析软体，结合最佳化软体IMSL，建立MARC之最佳化系统。

FEM model of the oilcan and truck was established in MSC/NASTRAN to determine the rule of the response during road transportation.

为了确定大型油罐箱运输过程中的响应分布规律,使用MSC/NASTRAN有限元软件建立了油罐箱和运输车整体的三维有限元模型。

To use a FEM software to study the interaction between the masonry house and foundation,a interface model is established.

为使用大型有限元软件分析砌体房屋与地基共同作用的问题，首先建立了基础与地基土的界面模型。

A preform shape can be gained with backward simulation from the final blade forged shape based on FEM.

为此,本文介绍了有限元反向模拟的基本步骤,综述了确定反向模拟中边界节点脱模准则的方法。

For validation purpose, the finite element method (FEM) analysis was introduced to compare with the result of ESPI.

为求精确性，所以本文引用有限元素分析(FEM)作为比较。

In order to investigate the superplasticity of ceramic matrix laminated composite, the superplastic deep-drawing process was simulated by FEM.

为研究陶瓷基层状复合材料的超塑性能,对其超塑拉深成形过程进行了有限元模拟。

The FEM models of BOF are established and thermal analysis is performed in order to fit the application of splashing technique in production.

为配合溅渣护炉技术在生产中的应用，利用有限元方法对转炉温度场进行了分析。

Some applications on FEM in the micro loudspeaker modal analysis and the acoustic response simulation are introduced.

介绍了有限元法在微型扬声器振膜模态分析以及声响应分析中的一些应用。

FEM simulation of sheet metal layered forming process has been introduced.

介绍了金属板料分层渐进成形过程有限元模拟。

FEM FCT is used to solve three dimensional hypersonic inviscid flow.

从Euler方程出发，利用流量修正有限元法（FEM?FCT）求解三维无粘流动的高速流场。

There-for the non-linearity of boundary condition in FEM of 3D sheet metal stamping is resolved.

从而解决了三维板料冲压成形过程有限元分析中的边界条件非线性问题。

He, pioneer of FEM, developed the method of fictitious grillage in the analysis of arch dams.

他提出的拱坝计算的格栅法，是在电子计算机出现以前的结构离散计算方法，也是有限元法计算的先驱；

It presents a new design method for pressure vessel in plasticstate with the help of FEM, and gives an optimized thick or profile design.

以失效前材料全部进入塑性为设计准则，对压力容器提出了用有限元法进行了优化设计的方法。

In the example of Nimu Bridge, a FEM model of 3D beams is established by beam grid method, and mode analysis and time history analysis have been done.

以尼木大桥为例,采用梁格法建立了空间梁单元有限元模型,进行了模态分析和动力时程分析。

Each kind of the dielectric in the cavity is regarded as a subdomain and analyzed by the FEM.

分别计算了腔体中填充各向同性和各向异性介质时的雷达散射截面,数值结果表明了该方法的有效性。

The working principle of the actuator was analyzed and the dynamic characteristic of the piezoelectric bimorph was studied by the FEM modal analysis.

分析了驱动器的工作原理，利用有限元分析软件对压电双晶片振子进行了模态分析，得到其动态特性。

On FEM simulating its stress and displacement characteristics, the contour of maximum and minimum principal stress have been drawn.

分析结果表明，长白山天池地区高陡斜坡整体稳定性较好，不会发生大规模崩塌。

The simulation of roll forming with multiple passes was studied by FEM software ABAQUS.

利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。

Apply the technique of CFD and FEM， advance the design of flow speed.

利用CFD(计算流体力学技术)，FEM(有限元技术)，提高设计流速。

Research in predicting and modeling microstructural changes in a workpiece using FEM is in progress.

利用有限元分析的方法预测和还原工件的微观结构变化尚待进一步发展。

Autoforge for finite-element method (FEM) analysis, the strain and temperature fields were simulated by thermo-mechanical coupled FEM.

利用有限元分析软件MSC Autoforge ,采用热 力耦合的弹塑性有限元方法(FEM) ,模拟了压缩过程中的应变场和温度场。

FEM has been used to simulate and analyze the high pressure rubber forming process of part with flange bending.

利用有限元技术,对凸翻边钣金零件的高压橡皮成形过程进行模拟分析。

The expansion of coiler during hot strip coiling was simulated with FEM method.

利用有限元方法对带钢卷取过程中的卷筒胀径进行了详细的数值模拟。

The FEM equation of acoustic wave is used to calculate the air-current natural frequency and pressure pulsation in the pipeline.

利用有限元法求解声学波动方程，建立了管内气流的有限元运动方程，计算出管内气柱的固有频率和气流压力脉动。

The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method).

利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。

Moreover, the temperature field distribution values are calculated by FEM software in the case of unequal heat energy gived by the same heat source.

利用有限元软件计算出同一热源在放出热能不同的情况下床身模拟件的温度场分布。

Convergence rates are also studied with examples and they are approximately equal in the NMM and the conventional FEM analyses for both material cases.

利用算例分析了用这种方法计算的两套覆盖函数的收敛率。

The results of dynamic measurement are in good agreement with that calculated by FEM.

动态测试与分析的结果与数值计算结果符合得很好。

There was no doubt that we would win the game after a fem more goals were scored.

又进了几个球之后,毫无疑问,我们会赢得这场比赛。

Moreover, FEFC forms the base of the FEM Application Framework.

同时，也为建立有限元应用程序框架打下基础。

The previous JTE results were obtained from the FDM and the FEM besides the analytical method.

国内外以往报道的JTE分析结果除采用解析方法外，数值方法主要采用差分或有限元法。

The regressive calculations of three dimensional FEM for the initial geostress in engineering area are achieved through ANSYS software.

在ANSYS中实现对工程区初始地应力的三维有限元回归计算；

The hammer forging process of TC6 titanium alloy clasp has been simulated by using rigid-viscoplastic FEM.

在TC6钛合金卡环的高温锤锻过程中,模具承受非常大的应力。

Based on a series of assumption, create the FEM model, and discuss mesh technology, stress-strain relations, interface contact and calculation methods.

在一系列假定基础上建立有限元模型,并对模型建立过程中的网格剖分技术、材料本构模型、界面接触处理方法及求解过程中的计算方法做了详细阐述。

The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.

在建立筒形件强旋有限元力学模型过程中，旋轮与工件接触区及其边界的描述是重要的一环。

There are many methods such as FEM(Finite Element Method) BEM(Boundary Element method) , FDM(Finite Difference Method) .

在探索的过程中,先后出现了有限元法、边界元法、有限差分法、离散单元法、快速拉格朗日法、数值流形方法及界面元法。

We present a FEM method for forecasting the suitable pressure on the retaining ring,which is critical in manufacturing good quality wafers.

在晶圆外部施加保持环可以把晶圆中心处和边缘处的抛光垫压平到一致高度,克服晶圆边缘的"过磨"现象。

After being analyzed with FEM, impedance tube method was introduced to measure sound transmission loss(STL) of glass.

在有限元分析基础上,采用了驻波管法对小样品玻璃进行隔声量测量。

Eight-nodded curvilinear quadrilateral isoparametric shell element is used both in the FEM and in the BEM.

在有限元方法和边界元法中均采用了八结点曲面四边形等参单元。

Based on the FEM simulation results, a series of UPVC branch pipes were prepared successfully in a custom-built bulge forming test-bed.

在模拟和优化的基础上，利用自行设计的实验台成功地实现了UPVC三通管的挤胀成型。

Based on the above method, by the use of FEM software of LS-DYNA3D, amodel of light vehicle cab colliding with the rigid wall was established.

在此基础上,利用有限元分析软件LS-DYNA3D,建立了某轻型客车驾驶室与刚性墙碰撞的有限元模型,并验证了所采用的焊点模拟方法。

FEM is applied to analyses the displacement and internal force of the structure under the two different mode of distribution of the earth pressure.

在此基础之上，利用弹性力学有限单元法分别对大圆筒结构在不同的墙后土压力分布情况下的位移、内力进行了计算分析。

Based on the closed die forging process and the FEM simulation for the pole, the mould structure for precision alternator pole forging is designed.

在磁极的精密模锻生产工艺分析和有限元模拟基础上,设计了磁极精密模锻新工艺参数和新型的锻模结构。

Based on this assumption, the 2.5 D finite element basic formulas had been established and compiled the FEM program by FORTRAN.

在这个前提下，推导了2.5维有限元的基本公式，并用FORTRAN语言编制了计算程序。

FEM NTA coupling model is set up for simulation of mining conditions at great mining height with an overlying rocks of low tensile strength.

在重点模拟大采高条件下覆岩低抗拉特性的基础上，建立了“大采高FEM-NTA耦合模型”。

Based upon element by element(EBE) iterative strategies,a feedback multi layer neural model is proposed for the heat conduct problem FEM analysis.

基于Element By Element(EBE)策略 ,提出了一种反馈网络和前向网络共同组成的多层神经网络以实现热传导有限元分析。

Based on the Finite Element Method (FEM), the FE analysis software ANSYS was used to build the FE model.

基于有限元,借助于有限元分析软件ANSYS,建立了柱状微电机的有限元模型。

The FEM based 3D buffeting analysis methodology is the most effective approach to the above problems.

基于有限元理论的全三维抖振分析体系是解决全桥分析最为有效的途径。

FEM is the main method of the current method in bellow designing.

如何设计出结构合理的波纹管以保证降噪效果具有一定的理论和实际意义。

In the simulation of operation, for the request of precision, Finite Elements Models (FEM) is the best model.

对于手术模拟等需要精确计算的场合，最佳的建模工具仍然是有限元模型。

Key Techniques in the process of using FEM to simulate the cutting are analyzed.

对使用有限元法进行切削过程模拟的关键技术进行了分析。

Experiment and FEM analysis for one bridge was finished,and the current technique of test and calculation for mchanical character was summarized.

对某桥梁进行了实测和理论分析，概述了它的力学特性测试及分析计算的现有技术。

The thermal stress in magnetron sputtered Al coating on uranium substrate was studied by thermal elastic plastic finite element method (FEM).

对铀表面磁控溅射沉积铝镀层的热应力进行了热弹塑性有限元分析。

Asymptotic homogenization is applied to simulate and predict the properties of carbon/carbon composites by means of finite element method(FEM).

将均匀化理论与有限元法相结合应用于碳/碳复合材料有效弹性性能的求解计算中。

The coupling impact of the two errors to the whole mechanism is studied with the method of orthogonal test and FEM.

将有限元法和正交试验法相结合研究两种误差对整个机构耦合关系的影响；

The finding of a study indicated that the applicability of FEM is clearly exhibited.

工程算例表明，采用有限元法计算双排抗滑桩的内力是可行的，增大了设计的合理性。

Then FEM modal analysis is completed on workstation by I-DEAS software to predict the vibration responses of gearbox under given gearing excitation.

并在工作站上用I-DEAS软件预估了在齿轮动态激励下齿轮箱的动态响应；

It discusses the resolvents to the problem of electromagnetic field, and the mostly used resolvents are FDM and FEM.

并讨论了电磁场问题的求解方法，常用的是有限差分法和有限元法。

Seta E . Hydroplaning Analysis by FEM and FVM: Effect of Tire Rolling and Tire Pattern on Hydroplaning[ R] .JSAE SYMPOSIUM No.

庄继德.现代汽车轮胎技术[M].北京:北京理工大学出版社,20011

Applying the theory of curved beam FEM,a practical method of structure analysis of curved bridge is build when considering the sidelong support.

应用曲杆有限单元法建立曲线梁桥的实用分析方法,并考虑了曲线梁桥的非径向支承特征。

The thesis simulates the process of the spline forming by the FEM software.

应用有限元分析软件,对花键轴的齿形成形过程进行模拟。

Using FEM,Dynamic characteristic on the block of model K5206NM compressor is analyzed.

应用有限元方法对K5206NM型压缩机机体进行了动态特性分析。

A novel design of TiNi/Si composite membrane microactuator is studied with finite element methods(FEM).

应用有限元方法对TiNi/Si复合膜微驱动器的结构设计进行了分析。

Lastly the Finite Element Method (FEM) is applied to analysis and checking the strength of pipeline.

应用有限元方法来分析校核管线的强度。

The strength of connecting rod of diesel engine using for vehicle is analyzed through FEM.

应用有限元方法，以一台车用柴油机的连杆为例，对该机连杆的强度进行了分析。

In the same time , this paper applied the plane strain FEM based on Biot theory to analyzed calculated result and observation information in scene.

应用比奥固结有限元方法，采用邓肯一张土体本构关系，模拟现场情况，计算分析了真空预压下土体的固结变形过程。

Based on in situ data, the permeability field of footwall rocks is evaluated by the finite element method (FEM).

应用现场实验成果,利用有限元方法计算了底板岩体渗流场;

The FEM(Finite Element Method) model of a novel linear motor was established,and then its correction was proofed.

建立了一种新型圆筒直线电机的有限元模型,并验证了有限元模型的正确性。

A FEM NTA coupling model is set up for simulation of mining conditions at great mining height with an overlying rocks of low tensile strength.

建立了大采高工作面支架系统可靠性的计算模型,通过系统可靠性参数的分析,提出了提高支架系统可靠性的途径。

Modal frequency and vibration response of the gear box are computed by structural FEM with a 3-D FE model.

建立齿轮箱三维有限元模型，采用结构有限元法计算齿轮箱模态频率和振动响应。

Nonlinear adaptive multigrid FEM for simulating multi-step excavation process was studied.

开发了模拟多步开挖过程的非线性自适应多重网格有限元方法。

Based on finite element method (FEM), the author compiles the three-dimensional seepage field computation program of RCC dam.

开展碾压混凝土坝渗流场的有限单元法研究工作，编制完成碾压混凝土坝三维渗流场计算程序。

---