tig是什么意思 tig怎么读
英式：[tɪg]
美式：[tɪg]
tig单词基本解析：
n.捉人（儿童游戏）v.（戏耍地）轻拍；轻碰；（儿童捉人游戏中）拍着；追到
tig变化用词：
tig英英释义：
tig中文词源：
tig 儿童捉人游戏 一种儿童游戏，可能来自 tick 拼写变体，引申词义接触。tig用法和例句：
tig
Schandmaul machen Stimmung, wenn n?tig mit Gewalt. Weit mehr als bei d......
2004的相关专辑:总记录数:3总页数:1当前页:1首页上一页1下一页末页
AFA 3G Gd Rod Top End Plug Girth TIG Wilding
AFA 3G含钆燃料棒上端塞环缝TIG焊接研究
Research on DCSP TIG welding process for Al
Al的DCSP TIG焊的研究
Welding of Hastelloy B-2 by TIG
Hastelloy B-2镍钼合金的焊接
Application of IPM in TIG Inverter Arc Welding Power Source
IPM在TIG焊逆变电源中的应用
Development of NSA-200 AC/DC TIG Welding Machine
NSA-200交直流氩弧焊机研制
TC4 alloy can be welded by many kinds of methods such as TIG, MIG, PAW and electron beam welding (EBW in short).
TC4钛合金在保护良好的条件下可以采用TIG、MIG、PAW及电子束焊等多种焊接方法。
The high-frequence oscillator used in TIG welding is a serious interference source to the nearby electronic circuits.
TIG焊中采用的高频振荡器，是邻近电子电路的严重干扰源。
Design and debug of voltage doubled ignition circuit for TIG welding
TIG焊倍压整流式引弧电路的设计与调试
Study on Control Circuit of Low Current Touch Arc Starting for TIG Welding
TIG焊小电流接触引弧控制电路的研究
A Study of Arc Length Control with Arc Light Sensor in TIG Welding
TIG焊弧光传感弧长控制的研究
Research of TIG welding rapid prototyping laser vision detecting system
TIG焊快速制造激光视觉检测系统的研究
The dynamic change of the molten pool influences the quality of welding joint directly in TIG.
TIG焊接过程中,熔池的动态变化直接影响焊接质量。
STUDY ON MELTING POOL AND ELECTRODE DURING TIG ARC WELDING
TIG焊接过程中熔池和电极的研究
Key technique of TIG welding machine applied in hyperbaric welding test chamber
TIG焊机应用于高压焊接试验舱的关键技术
Circuit Design for TIG Welding Machine and Its Anti-disturbance Measurements
TIG焊机的焊接电路设计及系统的抗干扰防护
DETECTION OF SURFACE TENSION AND EFFECT OF SURFACE ACTIVE FLUX IN TIG WELDING
TIG焊熔池表面张力的测定及表面活性剂的影响
Realize contacted arc ignition by programmed TIG welding
TIG焊程控接触引弧的实现
Neuro-fuzzy Control of Back Weld Width in TIG Welding
TIG焊背面熔宽的神经网络模糊控制
The results show: impact effect of hardness at weld toe by ultrasonic peening is not great than treatment by TIG dressing.
TIG熔修处理工艺在焊趾区引入了残余拉应力,而超声冲击在焊趾区形成了较大数值的压缩应力。
TIG deposit surfacing welding
TIG熔敷堆焊
The TIG states that an individual decision is the outcome of the strategic interaction between the efficiency agent and the equity agent.
TIG理论认为，个体决策是公平动因和效率动因之间战略互动的结果。
As an important heat source in welding,TIG arc is widely used in manufacturing industry,especially for aluminum alloy joining processes.
TIG电弧是焊接生产中的一种重要热源,交流TIG电弧在铝合金的焊接制造中的应用亦已相当广泛。
The Research on Mathematic Modelling of TIG Arc
TIG电弧的数学模型化研究
TIG surface remelting process
TIG表面重熔
PULSE TIG WELDING OF Zr-4 ALLOY
Zr-4合金的脉冲钨极氩弧焊
An Innovative TIG Line Frequency High Pressure Pulsed Arc Striker
一种新型TIG焊工频高压脉冲引弧器
APPLICATION OF FLUX- CORED WIRE TO TIG OF STAINLESS STEEL
不锈钢钨极氩弧焊药芯焊丝的应用
Mainly in charge of sales & Technical support for MIG/MAG; TIG; Robotics torches and spare parts; Laser welding equipments in automotive field and heavy industrial field.
专门负责在指定区域销售MIG/MAG及TIG,机器人专用焊枪和焊枪配件以及汽车行业激光焊接设备的高级技术销售工程师.
Mainly in charge of sales &Technical support for MIG/MAG; TIG; Robotics torches and spare parts; Laser welding equipments in automotive field and heavy industrial field.
专门负责在指定区域销售MIG/MAG及TIG，机器人专用焊枪和焊枪配件以及汽车行业激光焊接设备的高级技术销售工程师.
In this article, the author proposes a theory of intraperson games (TIG) to fill this important gap.
为填补这一空白，在这篇文章中，作者提出了一种内心博弈的理论（TIG）。
In order to increase productivity, for big size tank welding, SAF propose Plasma Plus TIG double torch solutions, welding speed is 30% to 50% higher than single Plasma torch Welding.
为增加焊接生产的效率，对于大尺寸工件的环缝何纵缝焊接，SAF采用等离子＋TIG双枪焊接工艺，焊接速度比单等离子增加30%至50%。
Current-zero period process and its charcteristics of AC TIG arc
交流TIG电弧的过零过程及其状态特征
Today, the next generation of this technology - AC TIG inverter - features three advanced squarewave technology capabilities.
今天,新一代的这种技术交流TIG焊变频三个特点矩形先进技术的能力.
The general concept and consist of pulse TIG welding machine improved are introduced in this paper.
介绍一种用普通直流氩弧焊机改装脉冲焊的装置,论述了各组成部分的基本原理。
This paper introduces the TIG welding technology for EGR cooler shell.
介绍了EGR冷却器外壳钨极氩弧焊焊接工艺。
This paper illuminates the principle,installation,failure,reason and solution of WSM series SCR inverter pluse TIG welding machine.
介绍了WSM系列晶闸管逆变式直流脉冲TIG焊机的基本原理、安装、故障现象、原因以及排除方法。
This paper introduced the design of a TIG welding machine, which is used for six PTP(point to point) assembling welding of the Hydraulic Torque Converter.
介绍了一种用于液力变矩器总成焊接的六点TIG焊专机控制系统。
The striking and stabilizing arc machine consisting of a RLC series resonant circuit of the AC TIG welding machine is introduced.
介绍了一种由RLC串联谐振电路构成的交流TIG焊机引弧稳弧器，试验表明可以解决小电流条件下的引弧和稳弧，效果良好。
In this paper, the basic principle of fuzzy adaptive PID controller is stated and a fuzzy adaptive PID algorithm based on static characteristics control in TIG welding power inverter is built up.
介绍了模糊自适应PID控制器的基本原理,建立了TIG逆变电源外特性控制的模糊自适应PID算法。
The recent research and development of tungsten electrodes used in TIG and Plasma technologies are introduced, and the tungsten materials as well as the effects of rare earth oxides are specially discussed.
介绍了近年对TIG(钨极惰性气体保护焊)和PLASMA(等离子体)焊接、切割用钨电极材料的研究进展和应用情况 ,着重对稀土钨电极材料及稀土氧化物作用等有关研究问题进行了讨论。
The paper introduction mechanism,application,selectio principal and some attentive items using of high frequency pulse TIG welding machine.
介绍高频脉冲TIG焊机的机理、用途、选型原则和使用时的注意事项。
From the result of experiment,the vision sensor system get the image that can reflect the weld track of TIG Deposit surfacing welding clearly.
从实验结果来看视觉传感系统所得到的图像能够清晰反映出TIG熔敷堆焊的焊接轨迹。
The automatic TIG welding has been successfully used in the successive welding of stainl...
以实际生产表明了钨极自动氩弧焊连续焊接不锈钢复合管的成功应用。
Have a look at our solutions for plasma arc welding but welding up to 8 mm, our Submerged arc welding stations or maybe our mechanised (orbital) TIG equipment for tubes or pipes.
伊萨能够提供用于管道焊接的各种解决方案。比如等离子电弧焊、厚度达到8毫米的对焊、埋弧焊工作站或者是机械化（轨道式）氩弧焊设备等等。
As a general quantitative theory, the TIG can be applied to many different contexts across disciplines, including, but not limited to, management science.
作为一般的定量理论，TIG可应用于各种不同的学科条件，包括，但不仅限于，管理科学。
automatic TIG orbital welding
全位置TIG焊
All welding joint with TIG.
全部采用氩弧焊.。
Welding consumables: flux cored wires, overed arc welding electrodes, solid wires, submerged arc welding, TIG rod/MIG wires, etc.
公司简介： 焊接材料，药芯焊丝，手工电弧焊条，实芯焊丝，埋弧焊材，TIG/MIG 焊材。
Multiprocess for AC MMA, DC MMA, AC TIG and DC TIG welding;
具有一机四用功能：手工交流、手工直流、交、直流氩弧焊；
Research of pose of TIG welding gun under geometric restriction
几何约束下TIG焊焊枪姿态研究
Comparative Research on Arc Stability in AC TIG Welding
几种交流TIG焊电弧稳定性的比较研究
A special TIG flux for welding mould made of ZA alloy is experimentally developed.
利用试验方法,研制出了一种ZA合金模具TIG焊接专用焊剂。
Effect of single-component fluoride flux on TIG arc shape for Ti alloy
单组分氟化物对钛合金氩弧焊电弧形态的影响
TIG BACKING WELDING PROCEDURE OF THICK-WALLED PIPE
厚壁管TIG打底焊工艺分析
Double-gun double-faced TIG Welding
双枪双面TIG焊
Twin-electrode TIG welding procedure and mechanism of weld formation
双钨极氩弧焊工艺及焊缝成形机理分析
Research on variable polarity TIG welding power supply
变极性TIG焊接电源的研制
Very convenient to operate by TIG Argon welding /MMA welding, suitable for welding stainless steel, mild steel, steel alloy, copper, etc.
可用TIG焊和手工焊，操作方便，可用在不锈钢，合金钢，碳钢，铜及其他有色金属的焊接。
May choose 3 welding methods: Directs current the TIG welding, the direct-current pulse TIG welding, the cocurrent arc welding.
可选择3种焊接方法：直流TIG焊接、直流脉冲TIG焊接、直流手弧焊。
Metal Induced-Reaction in Pulsed TIG Welding of Aluminium Matrix Composites
合金诱发反应脉冲TIG焊接铝基复合材料
Meanwhile the welded seam corrosion-resistance property of EBW of AA8009 alloy is better than that of TIG.
同时,AA8009合金电子束焊缝的抗蚀性要明显优于氩弧焊的抗蚀性。
Thus, standard consumer utility theory is a special case of the TIG if the role of the equity agent is ignored.
因此，如果不考虑公平动因的作用，标准的消费者效用理论就是TIG理论的一个特例。
Fig.6 The effect of heat input on the UTS of the TIG welded joints.
图6线能量与钨极氩弧焊焊接接头极限抗拉强度的关系。
Based on a lot of experiments and the data of weld width of TIG deposit surfacing,influencing parameters of weld width and the criterial welding measure during TIG deposit surfacing are advanced.
在大量试验的基础上,对TIG熔敷堆焊焊缝宽度进行数据分析,得出了在TIG熔敷堆焊情况下焊缝宽度的影响参数,提出了关于TIG熔敷堆焊焊接的规范措施。
Based on the investigation of the analogously controlled and microcomputer controlled power source, a new 8098 single chip microcomputer controlled welding machine is developed for the TIG welding.
在模拟控制和微机控制技术研究的基础上，开展了8098单片机控制TIG焊机的研制工作。
Based on the study on the analogously controlled and microcomputer controlled power source, a new 8098 single-chip microcomputer controlled welding machine is developed for the pulse TIG welding.
在模拟控制和微机控制技术研究的基础上，开展了8098单片机控制脉冲TIG焊机的研制工作。
The TIG welder used for much of the construction.
在氩弧焊焊接机建造多次使用。
The trawsform on the weld penetration depth are studied after welding the Austenitic steel of activated flux with TIG welding.
在采用TIG焊接方法时,在奥氏体不锈钢的表面涂敷一层活性化焊剂进行焊接,会影响焊缝熔深的变化。
SIMULATION ON TIG WELDING ARC BASING ON ARC-WELD POOL UNIFORM MODEL
基于TIG焊电弧-熔池统一模型分析焊接电弧
A digital IGBT inverter AC/DC pulsed TIG welding power sources based on DSP is developed,which adopts TMS320F240 series DSP as a core of the control system.
基于数字信号处理器(DSP)进行了数字化IGBT逆变交直流方波脉冲TIG焊机的研制,采用TI公司的TMS320F240型DSP作为控制系统的核心芯片。
A Visual Sensor Based Weld Seam Tracking Method for Precision Pulse TIG Welding
基于视觉图像传感的精密脉冲TIG焊焊缝跟踪
The multi-function vacuum welding equipment is a new exactitude welding machine,which can be used into vacuum diffusion bonding,vacuum brazing,vacuum hollow cathode arc welding and filled argon TIG.
多功能真空焊机是集真空扩散焊、真空钎焊、真空空心阴极电弧焊及真空充氩TIG焊为一体的精密焊接设备。
Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc.
如：电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
The experiment proves this system based on DSP can work in stabilization and meet the requirement of the TIG welding process.
实验证明该电源工作稳定可靠,较好地满足了工艺性能。
A-TIG welding as a high-efficient welding process is the method that TIG welding is made by covering the activating flux on the surface of the weldment.
对一种高效的TIG焊方法(A-TIG)进行了初步研究。A-TIG即在预先准备好的施焊材料上涂敷一层表面活性剂,对其进行系列堆焊试验。
It researches the TIG Deposit surfacing welding rapid shaping vision sensor system.
对于TIG熔敷堆焊快速成形视觉传感系统进行了一定的研究;
Due to changing welding condition caused by interference in TIG welding process,to improve the sensors and its control is two ways to promote accuracy of closed-loop control of welding quality.
对于焊接过程中常出现各种干扰,焊接条件时有变化的TIG自动焊而言,改进传感方法和控制技术是提高焊缝质量闭环控制系统控制效果的两大途径。
To weld and repair the aircraft landing gear by manual TIG welding instead of shielded metal arc welding(SMAW welding)which is used in air unit now is tentatively discussed.
对用手工TIG焊方法代替目前航空部队采用的手工电弧焊(SMAW焊)修理飞机起落架进行了初步探讨,并经试验得出了TIG焊的最佳焊接工艺。
The qualitative analysis is carried out on the behavior of the partial penetrated weld pool with welding current changing from pulsed peak value to base value during pulsed TIG welding.
对脉冲TIG焊未熔透型熔池在脉冲峰-基转换期间熔池三维形态变化行为进行了定性的分析,并从力和能量角度建立了未熔透熔池液面形态的数学模型。