elastoplasticity是什么意思   elastoplasticity怎么读

elastoplasticity单词基本解析：

elastoplasticity变化用词：

elastoplasticity英英释义：

elastoplasticity中文词源：

elastoplasticity用法和例句：

elastoplasticity

CAP elastoplasticity

CAP弹塑性

Keywords Upsetting with RR Method;Upsetting with TR Method;Crankshaft;Three Dimentional Finite Deformation Elastoplasticity Finite Element;Three Dimentional Net Redelimitation.;

RR法镦锻;TR法镦锻;曲轴;三维有限变形弹塑性有限元;三维网格重划;

3D elastoplasticity

三维弹塑性

3D elastoplasticity numerical analysis was done for the old casing design using ABAQUS FEM software and for the casing with wall t.

为此,应用ABAQUS有限元软件对原设计方案进行了三维弹塑性数值分析,进一步对壁厚增加以后的套管进行了弹塑性数值模拟分析。

Keywords hole trajectory;hole stabilization;elastoplasticity;theoretical model;stress analysis;theoretical analysis;Jiangsu Oilfield;Yancheng 3 Well;

井眼轨迹;弹塑性;理论模型;应力分析;理论分析;江苏油田;盐城3井;

viscoelasticity;elastoplasticity;power law;fractional derivative;ratchetting;cyclic loading with zero mean stress;true stress control;asymmetry of hardening between tension and compression

关键词:黏弹性;弹塑性;幂定律;分数导数;棘齿行为;对称零均值应力循环;真实应力控制;拉压硬化不对称;径向位移

Keywords threaded connection;elastoplasticity;stress;finite element method;

关键词螺纹连接;弹塑性;应力;有限元法;

Keywords high pressure waterflooding waterflood pump hydraulic end of pump elastoplasticity finite element method surface preparation residual stress;

关键词高压注水;注水泵;泵头;弹塑性;有限元法;表面预处理;

Keywords Initial Geometric Imperfections;PressureVessel;Elastoplasticity;Large Deformation;EndochronicConstitutive Equation;

初始几何缺陷;压力容器;弹塑性;大变形;内蕴时间;

To simulate the deform process of metal material by elastoplasticity finite .The coordinate is renewed after each iteration in order to simulate the deform law of elastoplasticity.

利用增量有限元理论,对金属材料的变形过程进行模拟。为了模拟工程中塑性变形较大的构件的变形规律,在每个加载步迭代完成后自动实现坐标更新。

Business card printing and membership card-making process, shall be based on different paper elastoplasticity, select the appropriate business card printing and membership card processing technology.

制卡和会员卡制息历程洋，须根据不不不不差别纸张的弹不不不不弹性之不不不不差别，拔取不合的制卡和会员卡制息工艺。

Keywords uniform loading;casing perforating;perforating parameter;compressive strength;elastoplasticity;finite element method;

均匀载荷;套管射孔;射孔参数;抗压强度;弹塑性;有限元法;

Based pm the method of static elastoplasticity, the failure dependency problem of RC frame structures studied under small and strong earthquakes.

基于静力弹塑性分析方法，对钢筋混凝土框架结构在小震和大震下进行了失效相关性研究。

The Elastoplasticity and Rheological Analysis and Their Application of Foundation Pit Excavation

基坑开挖的弹塑性与流变分析及其应用

Keywords directional well;perforated completion;fracturing pressure;elastoplasticity;coupling;finite element method;

定向井;射孔完井;破裂压力;弹塑性;耦合;有限元法;

Analysis of Excavation Stability in Hard Rock Tunnel by Brittle Elastoplasticity Damage FEM

岩质隧道开挖稳定性脆弹塑性损伤分析

Keywords settlement by mining coal;visco elastoplasticity;damage;

开采沉陷;粘弹塑性;损伤;

Keywords elastoplasticity;composites;isotropy;stress-strain relationships;

弹塑性;复合材料;各向同性;应力应变关系;

Keywords elastoplasticity;casing perforating;casing strength;stress analysis;

弹塑性;套管射孔;套管强度;应力分析;

Keywords Elastoplasticity;Stress;Strain;Oil reservoir;Multiphase flow;Fluid solid coupling;Mathematical model;

弹塑性;应力;应变;油藏;多相流动流-固耦合;数学模型;

Keywords Elastoplasticity;Oil and gas res ervoir;Temperature field;Fluid solid coupling;Mathematical model;Numerical simulation;

弹塑性;油气藏;温度场流固耦合;数学模型;数值模拟;

Keywords elastoplasticity;phase transformations;stress-work functions;strain-softening.;

弹塑性;相变;应力功函数;应变软化;

analysis of elastoplasticity

弹塑性分析

mechanics of elastoplasticity

弹塑性力学

APPLICATION OF ELASTOPLASTICITY COUPLED WITH DAMAGE IN STRAIN LOCALIZATION ANALYSIS

弹塑性损伤模型在应变局部化分析中的应用

elastoplasticity contact

弹塑性接触

elastoplasticity finite elements method

弹塑性有限元法

Keywords elastoplasticity finite elements method;gear shaft;heat treatment;

弹塑性有限元法;齿轮轴;热处理;

elastoplasticity theory

弹塑性理论

Stress Points and Iterative Equations in Solving Elastoplasticity by BEM

弹塑性边界元分析中的应力点和迭代方程

elastoplast bandage

弹性塑料绷带

The amount of deflection in the elastic phase, assumes the linearity to grow, after the elastoplasticity, the growth gradually changes slow.

挠度在弹性阶段，呈线性增长，进入弹塑性以后，增长逐渐变缓。

Keywords meshless method;reproducing kernel particle method;elastoplasticity;large strain;nonlinearity;

无网格法;再生核质点法;弹塑性;大应变;非线性;

Finally, based on the elastoplast theory, plastic design and analysis for metal hub of flywheel was performed.

最后，利用弹塑性理论，对飞轮转子的金属轮毂进行弹塑性设计与分析。

In this paper, the establishment of 3D FEM-contact model is based on elastoplasticity FEM theory and contact FEM related theory on ANSYS operating platform.

本文以ANSYS为操作平台,以弹塑性有限元基本理论和接触问题有限元基本理论为基础,建立了重力坝三维有限元接触模型。

The present work focuses on the microscopic elastoplasticity deformation andoverall elastoplastic behaviour of metal matrix composites reinforced by short fibers.

本文研究单向短纤维增强金属基复合材料的细现弹塑性变形和宏观弹塑性响应。

Keywords Mechanical Autofrettage;Axisymmetrical Elastoplasticity Residual Stress;Digital Speckle Correlation;

机械自紧;轴对称弹塑性;残余应力;光塑性;数字散斑相关;

Keywords flatness;elastoplasticity;finite element method;strip rolling;

板形;弹塑性;有限元;板带轧制;

Keywords Gas well;Perforated;completion;Underbalance perforating;Maximum;Negative pressure;Elastoplasticity;Stabilization;

气井;射孔完井;负压射孔;最大;负压;弹塑性;稳定;

Keywords Oil well;Gas well;Elastoplasticity;Analysis;Stress;Distribution;Critical velocity;Formation damage;

油井;气井;弹塑性;分析;应力;分布;临界速度;地层损害;

Investigation on the constitutive models of elastoplasticity coupled with damage for concrete

混凝土弹塑性损伤本构理论的研究

Keywords Filter cake;Compressibility;Permeability;Elastoplasticity;

滤饼;压缩性;渗透率;弹塑性;

Keywords pearlitic steel;elastoplasticity;dual_phase material;

珠光体钢;弹塑性;复相材料;

Keywords Mine ground pressure;Finite element method;Elastoplasticity;Stability;

矿山地压;有限元法;弹塑性;稳定性;

The First Foreign Language Dialectics of Nature Theoretical and Practice of Scientific Socialism Numerical analysis Matrix analysis Modern control theroy Modern mechanical measuring and testing technique Engineering elastoplasticity theory

第一外国语自然辩证法科学社会主义理论与实践数值分析矩阵分析现代控制理论现代机械系统测试技术弹塑性理论

Keywords cylindrical workpieces;forward spinning;elastoplasticity;finite elements;mechanism;

筒形件;正旋;弹塑性;有限元;机理;

The dimensional stability of the paper and paper elastoplasticity, hydroscopicity, and so on.

纸弛的尺寸不乱定性与纸弛的弹不不不不弹性，吸湿性等有关。

According to the elastoplasticity theory,he analyzes on the slotted sieve tubes,and obtains its collapsing strength.

结果与国外的实验数据进行对比,数值模拟结果比实验值略大,但两者相差较小,证明了该模型的正确性。

Keywords debonding;metal matrix composites;elastoplasticity;generalized selfconsistent method;finite element method;

脱粘;金属基复合材料;弹塑性;广义自洽方法;有限元方法;

Keywords Negative pressure;Drilling;Elastoplasticity;Stress;Density;Formation damage;Drilling fluid.;

负压;钻井;弹塑性;应力;钻井液密度;地层损害;

Keywords Boundary Element method;Elastoplasticity;tridimensionalstress;

边界元法;弹塑性;三维应力;

Keywords Boundary Element Method;Elastoplasticity;Bimaterial;Interface Crack;Stress Intensity Factor;Small-Scale Yielding;

边界元法;弹塑性;双材料;界面裂纹;应力强度因子;小范围屈服;

Keywords Boundary Element Method;Softening analysis;Elastoplasticity;Quasi-High Order Element Method;

边界元法;软化分析;弹塑性;准高次元;

Keywords metal-matrix;composite;elastoplasticity;yield stress;

金属基;复合材料;弹塑性;屈服应力;

Keywords metal matrix;short fibers;composites;elastoplasticity;micromechanics;finiteelement method;

金属基;短纤维;复合材料弹塑性;细观力学;有限元法;

In the light of the frequent breaking of the rod string in a surface driven screw pump well, the force condition of the string in the well is analyzed by means of the elastoplasticity theory.

针对井口驱动螺杆泵抽油杆柱断脱频繁的问题，应用弹塑性理论分析了抽油杆柱在井中的受力状况。

Analysis of Shearing Steel Tube with the Elastoplast Finite Element Method

钢管剪切弹塑性有限元分析

Keywords drilling;ultradeep well;casing;gypsum layer;failure;elastoplasticity;ABAQUS FEM;

钻井;超深井;套管;盐膏层;破坏;弹塑性;ABAQUS有限元;

Keywords Flameproof electric apparatus enclosure;Strength;Elastoplasticity;Finite element method;Parametrization design;

隔爆电气设备外壳;强度;弹塑性;有限元法;参数化设计;

static elastoplasticity

静力弹塑性

Keywords non-uniform loading;casing string;compressive strength;coefficient of non-uniformity;elastoplasticity;finite element method;

非均匀载荷;套管柱;抗压强度;不均匀系数;弹塑性;有限元法;

Investigation of Elastoplasticity Constitutive Equations of Bulk Amorphous Alloy

非晶合金的弹塑性本构关系研究

viscous elastoplasticity

黏弹塑性