eaf是什么意思   eaf怎么读

eaf单词基本解析：

eaf变化用词：

eaf英英释义：

eaf中文词源：

eaf用法和例句：

eaf

Heat Analysis of 100 t DC EAF at Pudong Iron and Steel Co.

100t直流电弧炉热工分析

Reform of upper limiter of electrode supporting arm in 10t EAF

10t电炉台车式电极支臂上升限位的改进

INDUSTRIAL EXPERIMENT OF 10 t EAF WITH BOTTOM BLOWING

10吨底吹电弧炉工业实验研究

Practice on Process Optimization of 150t Shaft EAF

150t竖式电炉工艺优化实践

Steelmaking Technology of a 150t UHP EAF with Batching DRI Charging

150t超高功率电弧炉配加直接还原铁冶炼工艺

In 1996, energy consumption of BOF and EAF steelmaking process were 31 and 314 kgce/t respectively in China.

1996年我国转炉工序平均能耗为每吨钢31kg标煤,电炉炼钢工序平均能耗为每吨钢314kg标煤。

In 1997,BOF process and EAF process were responsible respcfively for 60 1% and 33 7% of total world steel production respectively.

1997年世界产钢的 6 0 1%由BOF生产、 33 7%由EAF生产。

Optimization of 20t EAF Smelting Process

20t电弧炉冶炼工艺优化

Rebuild the Movable Base of 20t EAF

20t电弧炉活动炉座的技术改造

RESEARCH ON EQUIPMENT AND TECHNOLOGY OF 30t DC EAF

30t直流电弧炉装备与工艺研究

The experimental results are as follows:(1) Without EAF the fouling resistance increase along with addition of timeand change of the heat transfer coefficient is just contrary to the result.

3、通过改变磁场频率、实验介质硬度等过程参数从污垢热阻以及换热系数的角度来进行了实验研究和理论分析。

RESEARCH AND APPLICATION OF HOT METAL CHARGING INTO 50t EAF

50t电炉热装铁水工艺研究与应用

OPTIMIZING DESIGN OF THE HYDRAULIC PRESSURE SYSTEM FOR A 60 t EAF

60t电弧炉液压系统的优化设计

The computer monitoring system for a 60?t EAF

60t电弧炉计算机监控系统

APPLICATION OF 90 TONS CONSTEEL EAF PROCESS AT SGIS

90t CONSTEEL电炉炼钢工艺在韶钢的应用

Application of 90 t consteel EAF process at SGIS

90t CONSTEEL电炉炼钢工艺的应用

dedusting system for the Consteel EAF

Consteel电炉除尘系统

Application of EBT Technology in 30t EAF

EBT技术在30t电弧炉上的应用

Use of O/W emulsion fluids in hydraulic drive for EAF

O/W型乳化液在电炉液压传动中的应用

Application of PTI-Jetbox System to 70t EAF

PTI Jetbox系统在70t电炉上的应用

Application of novel dry ramming mix for UHP EAF

UHP电炉用新型干式打结料的应用

A New High Quality Charge Used for EAF

一种新型优质电炉炉料

Reduction of zinc oxide in EAF dust by carbon monoxide

不锈钢冶炼粉尘中锌还原的研究

Thermo-analytical Study on EAF Stainless Steel Dust by TGA and FTIR

不锈钢电弧炉粉尘加热过程的TGA及FTIR分析

Dedusting for small-medium scaled EAF

中小型电炉除尘

Analysis on Steelmaking Production Practice in 50 t EAF

中钢50t电弧炉炼钢生产实践分析

Furnace wall and furnace top of heating furnaces, covers of BH trough &ladles, linings of iron ladles &tundish, EAF roof, RH device and monolithic lance etc.

主要用于加热炉炉顶、炉墙、钢包盖、出铁沟盖、中间包内衬、铁水包内衬、水冷管包扎、电炉顶、RH升降管、整体喷枪等。

APPLICATION OF POST-COMBUSTION TO EAF STEELMAKING PROCESSES

二次燃烧技术在电弧炉炼钢过程中的应用

The product is then used in an EAF to make steel.

产物被用于电弧炉中炼钢。

Application of Artificial Intelligence in EAF Steelmaking Process

人工智能在电炉炼钢过程的应用

The material design, processing scheme and application of eqnesa-carbo brick for slag line of the first ABB UHP EAF in our country have been presented.

介绍了我国首台ABB型超高功率直流电弧炉渣线镁炭砖的材质设计、工艺路线和使用情况。

This paper introduces the oxy-coke lance for indensification of EAF melting.

介绍了焦氧喷枪强化电炉冶炼的工艺及其试验结果。

The techlonogical characterstics of melting S-steel by alkaline EAF were introduced.By S-allying and selected faint acidic slag technology during reduction period,the recovery yield of S is up to 93%.

介绍了碱性电弧炉冶炼含硫钢的工艺特点。通过在还原期S合金化和二次造亚酸性炉渣工艺,把S的收得率提高到93%。

Corrosion mechanism,technical requirement of dry ramming mix for ultra high power(UHP) electric arc furnaces(EAF) and the main improving points of the ramming mix are presented.

介绍了超高功率(UHP)电炉干式打结料的侵蚀机理、技术要求及新型UHP电炉干式打结料的改进要点,以及研制的UHP电炉新型干式打结料在钢厂的实际应用情况。

The steelmaking process control system of the 70t UHP EAF at Huaiyin Steel Group was introduced,including the details of the control task and main function in each subsystem.

介绍淮钢集团70t超高功率电炉生产过程控制系统,详细说明了各子系统在冶炼过程中的控制任务、主要功能。

Research results of DC EAF optimizing control models and their application in 150 t twin furnace casing UHP EAF of Baosteel are introduced.

介绍直流电弧炉优化控制模型的研究开发成果以及在宝钢150t双炉壳超高功率直流电弧炉的应用情况。

Stiategie decision,Feasibility Research Report,Preliminany Desig working Drawing design and Field service in converiter,EAF adn CCM etc.

从事转炉、电炉炼钢工程及连铸工程新建及技术改造的项目立项、可行性研究、初步设计、施工图设计及施工技术指导。

On Recovery of Zinc from EAF Dust

从电弧炉烟尘中回收锌

The design principle and performance of the refractories are analyzed for EAF,AOD and VOD production.

从电炉、AOD炉、VOD炉等方面阐述了耐火材料的设计和使用特点。

Analysis on Application of Low-Purity Oxygen in 70t UHP EAF

低纯度氧气在70tUHP电炉上应用分析

It make that control function is even more excellent and operation is even more stability of EAF.

使电弧炉设备的控制性能更加完善,运行更加稳定。

The essence of sequence continuous casting in EAF steel plant is the joining and matching of multi-process of production and the key is to shorten tap to tap time on EAF.

全连铸电炉炼钢厂的多炉连浇问题实质是多工序的衔接匹配问题。

This paper analyzes the reason that caused the surface defect of billet produced by EAF Steelmaking plant of Nanjing Iron and Steel Co.Ltd.

分析了南(京)钢电炉厂小方坯表面质量问题及产生的原因,涉及结晶器振动参数、保护渣等。

Production of Iron Oxide Red from EAF Dust

利用电炉炼钢烟尘生产氧化铁红

Using for covers of heating stove, EAF, RH.

加热炉炉顶、水梁包扎，各种高温炉内衬。

Using for covers of heating stove, EAF, RH. Working lining of ladle, iron ladle and various high-temperature furnace. Water-cool pipe. Various casting and pre-casting of high-temperature kiln.

加热炉炉顶、水梁包扎，各种高温炉内衬。钢包、水包内衬，电炉顶、精炼炉盖，各种高温窑炉不同型号预制件。

Pilot-plant Test of EAF Dust Treatment Include Zinc

含碳球团还原法处理含锌电炉粉尘的试验分析

Pelletizing properties of zinc-bearing EAF dust

含锌电炉粉尘的造球特性

New techniques and production experiences abroad were introduced about controlling the scrap quality and nitrogen amount in steel during the production of high grade steel by EAF process.

围绕电炉工艺生产高等级钢种在控制废钢质量和钢液氮含量等方面,介绍国外钢铁界研究开发的新技术和经验。

APPLICATION OF DOMESTIC POROUS PLUG BRICK TO UHP EAF

国产透气砖在超高功率电弧炉上的应用

After analysis of projection made by foreign specialists for developing orientation of EAF in the world,preliminarily infers the developing trent of EAF in our country in the future.

在分析了国外专家对世界电弧炉发展方向的预测后,初步推测了今后我国电弧炉发展的趋势。

It is of great strategic significance to develop the VD decarburization process and to realize the production of LC/ULC wire and rod with the EAF unit at Baosteel.

在宝钢开发VD脱碳工艺,实现电炉单元对低碳/超低碳线材的生产,具有深远的意义。

ON FURTHER DEVELOPMENT OF EAF STEELMAKING IN CHINA

在我国目前形势下如何进一步发展电炉炼钢

Thatthe process controlled with computer and the computer integlated manufacture system (CIMS) will play an important part in EAF steelmaking are predicted in this paper.

在未来的电弧炉炼钢流程中，过程计算机控制、计算机集成制造系统（CIMS）将起重要作用。

The decarburization rate in the test was higher than 0. 1%/min in the bath of high carbon content, which was much higher than in conventional EAF.

在本试验条件下高碳范围内脱碳速度大于0.1%/min,明显高于传统电炉。

No matter how small you are, a; eaf or a grass, you have your own love on the vast earth.

在辽阔的大地上,不管你是多么的渺小,是一片叶子还是一棵草,也总有着自己的恋情。

No matter how small you are, a ;eaf or a grass, you have your own love on the vast earth.

在辽阔的大地上，不管你是多么的渺小，是一片叶子还是一棵草，也总有着自己的恋情。

The model will be improved to predict the whole production process and evaluate its energy and material consumptions and production efficiency etc., which will provide guides for improving the operation and control of EAF.

完善后的模型可望对生产全过程作出动态的预报，并可综合评估电弧炉冶炼的能耗、物耗、生产效率等技术经济指标，从而为电弧炉工艺改进、生产操作与控制提供指导。

CLEAN STEEL MAKING IN THE EAF AT BAOSTEEL

宝钢电炉纯净钢生产实践

Revamping of the Control System for Baosteel UHP DC EAF

宝钢超高功率直流电弧炉控制系统改造

An EA framework: EAF is presented.Being independent of the selected model, it makes the problem solved more flexiblebly .

实现了一个探索性分析框架原型系统EAF,使得问题的分析与相关模型独立开来,因而更具柔性。

The result indicates that the refractoriesused in UHP EAF - refining furnace - CC have been nationalized completely and good application results of homemade refraciory products have heen obtained.

实践表明，超高功率电炉一精炼炉一连铸用耐火材料已完全国产化，国产耐火材料取得了良好的使用效果。

The effectiveness of the proposed method is illustrated by a simulation example for predicting the endpoint of EAF.

实践证明，预报结果接近实际值，该方法是切实可行并有效的，可以用于电弧炉炼钢终点预报。

However, with EAF fouling resistance still enhances at the beginning of experiment and later, it gradually minishes after experiment has started for some time.

实验结果表明：(1)没有经过电磁处理时，污垢热阻随着时间的增加而增加，换热系数随着时间的增加而减小；

Dedusting for small-medium scaled EAF is discussed,and then suggestions are proposed for design of EAF dedusting system with low cost,simple maintenance,easy operation and low operation cost.

对中、小型电炉除尘系统的设计进行一些探讨,并为设计出造价低廉、维护简便、操作简单、运行费用节约的电炉除尘系统提出几点认识与建议。

The characteristics and the smelting functions of direct reduction iron (DRI) in EAF have been comprehen sively reviewed and discussed in this paper.

对直接还原铁 (DRI)性能及其在电弧炉冶炼的特性作了较全面的论述。

The characteristics and the smelting functions of direct reduction iron (DRI) in EAF have been comprehensively reviewed and discussed in this paper.

对直接还原铁(DRI)性能及其在电弧炉冶炼的特性作了较全面的论述。

An Analysis of Full Contious Casting with EAF Plant

小电炉全连铸生产分析

Ltd. some measures have been put forward to improve sequence concasting and to make full use of EAF.

并提出了提高全连铸水平、充分发挥电弧炉生产能力的措施。

THE APPLICATION OF SVC CONTROL SYSTEM SINICIZED IN EAF OF GIS

广钢电炉SVC控制系统国产化的应用

EAF smelting practice with hot metal charging in GZIS

广钢电炉热装铁水工艺实践

APPLICATION OF PLASMA TECHNOLOGY TO TREAT EAF DUST

应用等离子体技术处理电弧炉烟尘

Consteel EAF and Preheating of Scrap

康斯迪电炉与废钢预热

A new analysis method of detecting the molybdenum corrosion-inhibitive drug,copper and aluminum in pure water system for electric arc furnaces (EAF) with ICP-AES has been developed.

建立了等离子发射色谱法对钼系缓蚀剂和电炉纯水中的铜、铝离子进行联合测定的方法。

The high-reactive mode of intensify EAF , is chief circuit frame of only economically dvisable, whick is preached to carry out, so far.

强化电弧炉的"高阻抗"模式,是至今被倡导实现"超高功率化"唯一经济合理的主电路供电结构。

High-strength, impacting resistance, erosion resistance and abrasion resistance. Using for roof, gate and burner of EAF.

强度高，抗冲击、抗冲刷、耐磨损。用于电炉顶，各种炉门、立柱、横梁、烧嘴等。

EAF steelmaking technology in fast development

快速发展中的电弧炉炼钢技术

It is lnecessarythat applying slag-less steel tapping technique in EAF for developing secondary metallurgy ofladle furnace.

指出了为发展钢包二次冶金技术、改造电弧炉应用无渣出钢技术的必要性。

An analytical frame work is developed by treating the BOF steel as EAF steel's substitutes, Then the application potential and application potential are gotten using the framework.

提出了电弧炉炼钢比较优势分析框架，将电炉钢和转炉钢作为替代品进行比较，得出了电炉炼钢的优势及影响其应用的因素。

The primary new technologies that improve the productivity of EAF mainly include EAF power input technology,oxygen input technology and EAF intelligent control technology(expert system).

提高电弧炉炼钢生产率主要基于以下几项新技术,包括改善电弧炉电效率、强化供氧技术、智能控制技术(专家系统)等。