castability是什么意思   castability怎么读

castability单词基本解析：

castability变化用词：

castability英英释义：

castability中文词源：

castability用法和例句：

castability

The SPHD steel converter-smelting and direct-continuouscasting process is introduced.The casting can be smoothly done with strengthening deoxidation to improve the castability of liquid steel.

介绍了转炉冶炼SPHD钢直接连铸工艺,通过加强对钢水的脱氧,改善钢水可浇性,保证了正常的浇注。

The paper mainly summarized the small alloying additions added to the gold alloy for jewellery as the strengthener,deoxidizer,grain refiner and castability improver.

从提高强度、防止氧化、提高铸造性能以及细化晶粒几个方面综述了饰品金合金中微量添加元素的一些研究现状。

Keywords low carbon low silicon steel;castability;composition control;medium-thin slab caster;

低碳低硅钢;可浇性;成分控制;中薄板连铸机;

This paper analyzes the influence of calcium treatment on the castability of continuous casting molten steel.

分析讨论了钙处理对连铸钢浇注性能的影响。

Keywords single crystal alloy;VIM;castability;properties of blade;

单晶合金;真空感应熔炼;铸造性能;叶片性能;

Keywords die casting design;manufacturability analysis;die castability analysis;structure processability evaluation;feature modeling;

压铸件设计;可制造性分析;可压铸性分析;结构工艺性评价;特征建模;

In this paper, a die castability evaluation prototype system-DCDFM was set up on the basis of establishing integrated die casting model and effectively organizing analysis knowledge.

基于DFM思想,在建立完整的压铸件信息模型、效组织各种评价知识的基础上,建立了可对压铸件设计全面进行可压铸性分析、构工艺性评价的工艺咨询原型系统。

Keywords billet continuous casting;Al-killed steel;castability;orthogonal test;

小方坯连铸;铝镇静钢;可浇性;正交实验;

Castability of billet continuous casting for low-carbon low-silicon Al-killed steel

小方坯连铸低碳低硅铝镇静钢可浇性

Very satisfactory castability has been achieved and the production cost remarkably cut down in application of the new technology.

并将其应用在部分冷墩钢的实际生产中,在获得好的钢水浇铸性能的同时,还降低了生产成本。

INFLUENCE FACTORS OF CASTABILITY FOR Al-KILLED STEEL AND ADOPTED MEASURES

影响铝镇静钢可浇性的因素分析及采取的措施

The castability of two kinds of titanium containing NCT1 and titanium free(NC1)nickle based ceramometal alloys without beryllium was investigated.

报告了最近研制的牙科无铍、含钛的镍基烤瓷合金（NCT1）和无铍、不含钛的镍基烤瓷合金（NC1）的可铸造性。

Keywords Sterling silver alloy;Silicon;Castability;

斯特林银;硅;铸造性能;

Keywords non hafnium superalloy;fatigue fracture;overload damage;castability;

无铪定向合金;疲劳断裂;过载损伤;可铸性;

This paper deals with the Influence of modificator Na and P on castability of ZL108 alloy.

本文研究了钠变质和磷变质对ZL108合金铸造性能的影响。

Keywords slab caster（ASP）;refining;melting steel;castability;

板坯连铸机;精炼处理;钢水;可浇性;

Keywords Dental Alloys;Castability;Nickle;Titanium;

牙科合金;可铸造性;镍;钛;

The effects of Al and Mo content on the castability of cast Ti-Al-Mo-1Zr series titanium alloys were studied, by using the less active graphite mould at high temperature and pouring with vacuum consumable electrode arc skull furnace.

用在高温下与钛反应性低的石墨型,采用真空自耗电极凝壳炉浇注,运用正交试验设计,测定了Al、Mo含量对Ti Al Mo 1Zr系铸造钛合金铸造工艺性能的影响。

This paper deals with the influence of Fe and Mn on castability of ZL108 piston alloy.

研究了铁、锰对ZL108活塞合金铸造性能的影响。

The results suggested that there were no significantly negative effects on the castability of nickle based alloy with a little amount of titanium addition.

研究结果说明加入少量钛到镍基合金中，对合金的可铸造性无显著的不良影响。

Keywords thin slab casting;ultra-low- carbon Steelgrade;composition control;castability;

薄板坯连铸;超低碳钢;成分控制;可浇性;

Castability, overload damage and recrystallization are discussed and their effects on stress rupture behavior and high temperature low cycle fatigue fracture are analyzed.

讨论了定向凝固高温合金的过载损伤及其再结晶,较系统地分析了对材料持久性能、高温低循环疲劳断裂的影响。

The castability was tested through mesh monitor test method (MMTM)and lamellae casting(LC).

试验采用网格检测法和薄片铸造法，通过计算网格数和薄片完整性来评价可铸造性。

The improved mechanical properties and good castability of this alloy, combined with low cost, make ...

该合金力学性能高，可铸性好，成本低，适于生产应用。

The experimental study of the effect of Be on the castability of alloy for porcelain-fused-to-metals

金属元素铍对烤瓷合金铸流率影响的实验研究

Keywords Al content;Mo content;cast titanium alloys;castability;effects;

铝含量;钼含量;铸造钛合金;铸造性能;影响;

Keywords Al-killed steel;inclusion;castability;

铝镇静钢;夹杂;可浇性;

A castability study of Ti-75 alloy for dental clinic use

铸模温度对Ti-75合金铸流率影响的研究

Effects of the Mold Temperature on the Castability of Ti-Nb-Zr-Sn Alloy for Dental Use

铸模温度对牙科用钛铌锆锡合金铸流率影响的研究

Keywords Castability;Investment;Casting method;Low-golden dental casting alloy;

铸流率;包埋料;铸造方法;低贵金属合金;

Keywords castability needle-like iron phase fluidity shrinkage;

铸造性能;针状铁相;流动性;收缩性;

test for castability

铸造性能试验

castability test

铸造性试验

Ltd.were introduced,such as the composition control and castability of the melting steel.

阐明了为解决此问题所采取的技术措施和收到的效果。

Keywords superalloy;oxidation;stress rupture;fatigue;castability;

高温合金;氧化;持久;疲劳;铸造性能;

Grey cast iron with high carbon equivalent has excellent castability, but?it's?difficult to get high strength.

高碳当量灰铸铁具有良好的铸造性能,但提高强度是一个重要研究课题。