welds单词基本解析：

n.焊接点，焊接处( weld的名词复数 )v.焊接( weld的第三人称单数 ); 熔接; 锻接; 使紧密结合
v. 焊接, 使结合n. 焊接, 焊缝
n.焊接点，焊接处( weld的名词复数 )；

welds变化用词：

welds英英释义：

名词 weld:

European mignonette cultivated as a source of yellow dye; naturalized in North America

同义词：dyer's rocket, dyer's mignonette, weld, Reseda luteola

United States abolitionist (1803-1895)

同义词：Weld, Theodore Dwight Weld

a metal joint formed by softening with heat and fusing or hammering together

同义词：weld

动词 weld:

join together by heating

同义词：weld

unite closely or intimately

同义词：weld

weldn.European mignonette cultivated as a source of yellow dye; naturalized in North America

同义词：dyer's rocketdyer's mignonetteReseda luteola

United States abolitionist (1803-1895)

同义词：Theodore Dwight Weld

a metal joint formed by softening with heat and fusing or hammering togetherv.join together by heating

"weld metal"

unite closely or intimately

"Her gratitude welded her to him"

welds中文词源：

welds用法和例句：

welds

The corrosion resistances of fusion zone and weld decay zone have all decreased after GTAW and LBW process.

GTAW焊件在焊道及焊接衰化区的腐蚀情形会随著时间增加而加深。

I purposely made it short so curved welds can be made.

i故意作出简短，使弯曲焊缝可以作出。

The welds produced in MZ-1250 Model SAW are excellent, and can meet the demand that continuous work with large current for a long time is needed.

MZ-1250型埋弧焊机焊缝成型美观，能满足客户长时间大电流不间断工作的需要。

Illumination of PLC panel and weld area and operation desk.

PLC柜,焊缝区及操作台的照明

PLC sequence panel including program software and weld programming terminal.

PLC程序控制柜,包括程序软件和焊缝程序终端。

Don't drill or weld on tube, coupler and plank frame.

不可以在架杆、扣件和踏脚板框架上打孔、电焊；

Don’t weld on training wheels.

不要固定培训工具。

Die Weld ist zehr Klein, die Weld ist zehr Klein.

世界其实很小，世界其实很小。

Mainly used in coating the weld joint of buried steel pipeline and insulated pipeline.

主要用于埋地钢质管道现场焊接补口和保温管线现场补口；

They also look for potential molding defects, such as gas entrapment, weld lines, shorts and sinks.

也可以看出潜在的模塑缺陷如气体夹陷、熔接线、缺胶和凹陷等。

The electroslag welds were found to have a lower level of fracture toughness than implied from qualification tests.

人们发现电渣焊缝的断裂韧性较鉴定试验所给的结果要低。

This paper also introduces some laser weld equipment and weld process,performance of WTB and its application.

介绍了激光焊接的设备与工艺、焊接钢板的性能与应用。

Introduced here is the advanced flux cored down weld technology.

介绍了药芯焊丝自保护下向焊技术。

Ultrasonic flaw location in semisphere butt welds by sound path method is described.

介绍半球对接焊缝超声探伤的声程定位方法。

Several main ways of deagnetization for welds are introduced from practical experience in the paper.

从工程中的实际经验,介绍了焊接坡口退磁的几种主要方法。

They weld the pieces of a broken axle .

他们焊接断了的车轴。

It is possible that he will use laser to weld the alloys.

他将用激光焊接合金，那是可能的。

His job is to weld parts together.

他的工作是焊接零件。

After weld repairs, however, the overall quality and reliability of a cast valve is difficult to determine.

但是，在焊补后，铸件阀门的整体质量和可靠性就变得难于保证。

But the wild child boldly gets rid of him with a fluid shield and has yielded a building without welds.

但这狂野的小孩勇敢地以一种流体质除去了他,成功地生产了一座无焊点的建筑。

But the wild child boldly gets rid of him with a fluid shield andhas yielded a building without welds.

但这狂野的小孩勇敢地以一种流体质除去了他，成功地生产了一座无焊点的少女。

But the wild child boldlygets rid of him with fluid shield and has yielded abuilding without welds.

但这狂野的小孩勇敢地以一种流体质除去了他，成功地生产了一座无焊点的建筑。

If the tacked weld becomes a part of the whole weld, its quality requirement shall be the same as that for the welds.

作为焊缝一部分的定位焊，应与该焊缝的质量要求相同；

The weld nugget had a dynamic recrystallized,fine isometric crystal structure.

其中,焊核为明显的再结晶等轴晶粒,晶粒明显细化;

Excellent gas cutting property and weld ability.

具有优异的焊接性能和切割性能。

The IWM travels inside the pipe.After completing a weld, the unit moves down the pipe to the next weld.

内焊机能在管子内部行走，在完成一条焊缝后，装置将沿着管子移动并靠近下一条焊缝。

It illustrated the importance and the bright prospect of the application of the automatic weld seam tracking in EBW.

分析了其组成、原理及其在实际生产中的应用,阐述了焊缝自动跟踪技术在电子束焊接中的重要性及其应用前景。

In the present work the diffusible hydrogen content in steel welds made with this process is determined.

分析了电弧区水蒸气分解及解离的热效应,利用数值方法计算出电弧非导电区的温度及氢分压分布;

The halides of MnCl_2, CdCl_2, ZnF_2 and NaF reduce weld penetration as well as width.

卤化物MnCl_2,CdCl_2,ZnF_2,NaF都使熔深减小的同时也减小熔宽。

Only firm action by the government can weld the nation together to face the troubles ahead.

只有政府的坚决行动才能使国家紧密地团结在一起，共同对付面临的困难。

Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.

因此，断裂可能是由于从塞焊焊缝内的焊渣和气孔外形成的尖锐的疲劳裂纹而产生的。

Hence lack of fusion and slag would exist at the weld root and create a large initial crack condition.

因而未熔透及夹渣存在于焊缝棍部，并造成大的初始裂纹条件。

A satisfied weld appearance was obtained under the optimized process parameters.The surface of observ...

在合理的工艺参数下,可获得表面光滑、无堆高和无变形等缺陷的焊缝。

No spalled paint exists at the plug weld and for a short distance each side of the plug weld s.

在塞焊焊缝处及塞焊周围距离内无细漆碎屑存在。

Weld up one support for the turbocharger.

在增压器焊上一根支撑。

Dye-penetrant and magneticparticle inspection techniques were used on the repaired and other 21 remaining original welds.

在已修补了的和其余21个原来的焊缝上进行了着色渗透和磁粉探伤工艺处理。

You must weld and grind this area before painting.

在油漆之前你必须把这个地方电焊修补、磨好。

A cavity is made on both sides of weld bead.

在焊道表面两侧作一空腔。

Before applying heat for a weld, the plates should be clamped together.

在用热进行焊接之前，必须把金属板紧紧地夹在一起。

It take speed and skill to weld steel at this heat.

在这样的温度焊钢需要速度和技术。

It takes speed to weld steel at this heat.

在这样的高温下熔接钢铁需要快速。

Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking.

在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。

How do I weld stainless steel?

如何焊接不锈钢?

With Cold Jet, complete weld lines can be cleaned in 25 minutes.

如果使用Cold Jet,彻底清洁焊缝可在25分钟之内完成。

Assist the Engineering Department in producing Weld Maps if necessary.

如需要，协助工程部准备焊接图.

Review the Weld inspection reports for each project and rectify any possible documentation errors.

审查焊接检验报告,修改文件上可能的错误。

Bolted bonnet with seal weld.

密封焊接的螺栓阀帽。

Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.

对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。

Dye penetrant examination of the completed weld.

对已完成的焊缝进行着色渗透检测。

Radiographic inspection of all cross-point of welds, as well as all welds showing doubtful ultrasonic indications.

对所有焊接交叉点及超声波显示有可疑迹象的所有焊缝的射线检查。

The butt weld is easier to inspect nondestructively than the fillet welds.

对接焊缝比角接焊缝更容易进行无破坏检查。

It may be a reference for the NDT of welds.

对焊缝无损检测与国际接轨有借鉴。

The liquid penetration method, procedure, defect indication and indication characters of pipe welds in boiler were described simply in this article.

对锅炉管道焊缝液体渗透检测方法、操作程序、缺陷显示及痕迹特征作了简单介绍。

Workers are using electric welders to weld cracked steel.

工人正在用电焊机把断裂的钢筋焊结在一起。

Code for visual inspection and acceptance of site weld of engineering.

工程建设施工现场焊接目视检验规范。

A mininal error results in weld divergence.

差之毫厘，谬以千里。

CHANGZHOU WULIIAN ELECTRIC WELD AND SKIVE EQUIPMENT CO., LTD.

常州市武联电气焊割设备有限公司。

The distribution of residual stress of weld joints is analyzed.

并分析了焊接接头残余应力的分布规律。

Abroad using for induction cooker surge circuit and UPS power and high frequency turn weld machine.

广泛用于电磁炉震荡电路,UPS电源,高频逆转变焊机等。

Tack welds to be Incorporated in the final weld shall be cleaned and prepared at each end.

应使用已评审过的工艺所要求的预热和焊接消耗品进行定位焊。

Should be able to interpret weld X-rays and other common non-destructive test results.

应能看懂焊接X光和其他普通无损探伤检测结果。

All welds or soldered structural joints should be inspected.

应该检查所有焊接或被焊接的结构联接。

The test is completed when unbuttoning commences without a fracture in the weld.

当开始解扣而焊接处却没有裂缝的时候,测试完成了。

Care must be taken to ensure that the surfaces are thoroughly clean first, for dirt will weaken the weld.

必须注意，首先要保证焊接头表面十分清洁，因为污物会减弱焊缝的强度。

Quick: Don't need to weld and galvanize, the setting time is 3 times quicker than the flange connect fitting.

快速不需焊接和再镀锌，安装速度比法兰连接管件快3倍以上。

Our botanists try to find out where useful weld plants grow .

我们的植物工作者们设法找到有用的野生植物生长的地方。

The observed friction force is the force required to break these tiny welds.

我们观察到的摩擦力，就是破坏这些细微的焊接点所需要的力。

I would use a cohesive glue to weld the tubes to each other.

我会用粘胶把这些电子管粘起来。

I have suggested TSM buy the weld nut from USA(just like the cap nuts) to save time in finding a repair.

我已经建议TSM从美国采购焊接螺母（与这种螺帽很类似）以节省修理时间。

All cracks were detected in regions where such manually made weld passes existed.

所以检查到的裂纹都位于有手工焊缝存在的区域。

Remove all weld splatter and burrs.

所有焊缝必须焊透.

All weld build-up or buttering shall be 100 % examined by MT, followed by RT or UT.

所有补焊或对接焊应先进行100%磁粉检测，接着作100%射线或超声检测。

Weld abandoned tools onto the wheel.

把废弃的工具焊接上车轮。

Weld a bunch of untrained recruits into an efficient fighting force.

把未经训练的一群新兵组织成有战斗力的部队。

Drag onto the page to add concave, convex, or flush weld s. Increase height to fit above other weld shapes.

拖到绘图页后，可以添加凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接形状。

Indicates concave, convex or flush weld s. Increase height to fit above other weld symbol.

指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。

Steel welds are classified into three grades in order to evaluate their quality.

按照焊缝质量级别确定的原则,将焊缝级别分为三个等级;

Welds standardized test plates for Code conformance.

按规范焊接标准的检验样扳。

Rotation speed is one of the key reasons which are relative to the quality of friction stir welds ...

搅拌工具旋转速度是影响接头成型形貌的关键原因之一,速度过低有可能会导致隧道型孔洞缺陷。

Rotation speed is one of the key reasons which are relative to the quality of friction stir welds and tunnel defect existes at lower rotation speed.

搅拌工具旋转速度是影响接头成型形貌的关键原因之一，速度过低有可能会导致隧道型孔洞缺陷。

用作动词(v.)

Weld abandoned tools onto the wheel.
把废弃的工具焊接上车轮。

His job is to weld parts together.
他的工作是焊接零件。

用作名词(n.)

They weld the pieces of a broken axle.
他们焊接断了的车轴。

His job is to weld parts together.
他的工作是焊接零件。

Dye penetrant examination of the completed weld.
对已完成的焊缝进行着色渗透检测。

Weld identification single hole punch.
鉴别焊缝的单孔冲压机。

---