spinneret单词基本解析：

n.喷丝头
n. [纺]喷丝头
n.喷丝头；

spinneret变化用词：

spinneret英英释义：

SpinneretSpinneret refers to a multi-pored device through which a plastic polymer melt is extruded to form fibers. Streams of viscous polymer usually exit into cool air or liquid to solidify.

以上来源于:Wikipedia

spinneret中文词源：

spinneret用法和例句：

spinneret

Y shape spinneret

Y形喷丝板

A manufactured fiber formed by compound of cellulose, refined from cotton linters and/or wood pulp, and acedic acid that has been extruded through a spinneret and then hardened.

一个制造纤维所形成的复合纤维素，完善由棉短绒和/或木浆，和acedic酸已被挤压通过喷丝板，然后硬化。

Usually the number of holes in the spinneret determines the number of filament in the yarn

一般喷丝头细孔的数量决定了纱中长丝的根数。

filiform spinneret

丝形蜡腺

Mechanics designing of spinneret orifice clearance space for hollow fiber

中空纤维喷丝孔开口间隙机械设计

Keywords Diacetate tow Shape variation Spinneret Water content in dope;

二醋酸纤维素丝束;截面异形度;喷丝帽;浆液水分;

In this article, the design of "-"spinneret of Polyester FDY was introduced.The effect of spinning temperature , spinning speed and quench process to the flat target of the filament were discussed.

介绍了涤纶FDY扁平丝“-”型喷丝板的工艺设计,主要讨论了纺丝温度、纺丝速度、侧吹风等工艺对纤维扁平度指标影响。

DISCUSSION ON 125 DTEX/36 F PET POY PRODUCTION PROCESS WITH 8-END SPINNERET

八头纺生产125 dtex/36 f涤纶POY

The company on the production of the textile industry mainly spinneret, according to the needs of customers can produce all types spinneret.

公司主要以生产纺织业上喷丝板为主，按客户的需要可以生产各种类型喷丝板。

Keywords noncircular PAN fiber;Y shape spinneret;dry-jet wet spinning;

关键词异形PAN原丝;Y形喷丝板;干湿法;

The effect of spinneret hole diameter on the filament diameter and birefringence of PET POY was studied by using the same spinneret.

具体分析了喷丝孔直径与剪切速率及喷丝头拉伸倍数之间的关系，提出了喷丝孔直径的选择依据。

And also effect of spinneret draw-ratio on fibre aggregated structure and the properties was discussed.

分析喷丝头拉伸比对纤维的聚集态结构及性能的影响。

The recovery process of monomer smoke at strand spinneret from nylon6 production was analyzed.

分析比较了尼龙6生产中注带处单体烟的几种回收方法。

PET POY with different linear density and orientation can be produced with the same spinneret.

利用具有不同孔径的同一喷丝板生产不同线密度和取向度的涤纶POY。

spinneret cleaning

刮板

anterior spinneret

前纺器{拉}

The application experiments show they work better than traditional spinneret and can replace high-cost Au Pt spinnerets.

可纺性试验结果表明，其性能都达到或超过传统喷丝头，完全可以取代成本高昂的铂金喷丝头。

Melt-spinning with all kinds of chemical fiber spinning, dry spinning, wet spinning, and special-shaped hole spinneret hole;

各种化纤纺丝用熔纺、干纺、湿纺、圆孔及异型孔喷丝板；

same spinneret

同板

spinneret with multi-shaped orifices

同板多形

Design of Spinneret Used for Preparation of Yarn with Different Shrinkage

同板异收缩纤维用喷丝板的设计

Structure and properties of polyester blended yarn produced by one spinneret

同板涤纶混纤丝结构与性能的研究

posterior spinneret

后纺器(动)

orifice of spinneret

吐丝孔

Spinneret head

喷丝头

Keywords spinneret;fine denier;preoriented yarn;technological process;polyethylene terephthalate fiber;

喷丝头;细旦;预取向丝;工艺;聚对苯二甲酸乙二酯纤维;

spinneret draft

喷丝头拉伸

The tantalum spinneret is a key part in chemical fibre silk spinning_machine.

喷丝头是化纤纺织机上的关键部件。

spinneret hole

喷丝孔

Effect of diameter of spinneret hole on diameter and birefringence of PET filament

喷丝孔孔径对涤纶单丝直径与双折射的影响

spinneret cap

喷丝帽

Keywords spinneret;automatic inspection;capture;image processing;

喷丝板;自动检测;采集;图像处理;

spinneret holder

喷丝板座

The state of development of spinneret

喷丝板的发展现状

spinneret assembly

喷丝板组合件

spinneret orifice

喷丝板细孔

spinneret's auto inspection

喷丝板自动检测

STUDY ON AUTOMATICALLY DESIGN SOFTWARE OF SPINNERET

喷丝板自动设计系统的研究

The more resonable the capillary confiyura non of spinneret.the better the spinnability.when designing spinneret,we shou...

因此，在设计过程中要综合考虑喷丝板结构各参数，此外，还讨论了结构不同的三种异形喷丝板的清洗方法和效果以及其使用寿命。

large spinneret

大板径喷丝板

Nylon is meltspun. That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.

尼龙是采用熔纺工艺制成的,即将由熔化的尼龙切片构成的尼龙熔融体,强制通过喷头的纺丝孔

Nylon is meltspun.That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.

尼龙是采用熔纺工艺制成的，即将由熔化的尼龙切片构成的尼龙熔融体，强制通过喷丝头的纺丝孔。

The practical experiments showed that fiber spinnability was optimized when spinneret negative draw ratio was -73%.

工业化试验表明:当喷丝头负拉伸率为-73%时,纤维可纺性达到最佳状态。

production and maintenance of the automobile,motorcycle,engine,aeroplane,Metal press piese,oil,pump glib,compressor part and spinneret and washing,filtration of core of chemical fibre industry.

应用范围：电子电器零件、医疗器械、汽车、摩托车、机车、飞机零部件的生产与维修，金属冲压件、油泵油嘴、压缩机零件及化纤行业的喷丝板与过滤芯的清洗。

The effects of spinneret hole shape, characteristic dimension of spinneret ,hole arrangement and cool conditions on degree of profile were discussed.

异形喷丝孔的当量直径、截面积、孔长等特征尺寸决定了熔体在喷丝孔中的流变行为，建议采用当量异形度作为纤维的异形度指标。

I plant professional sheet die. Sheet die. Linmo die. Spinneret lattice mold. Board hollow board (sunshine board) die. Variety of non-stop machine for rapid network with. Metering pumps. Distributor.

我厂专业片材模具.板材模具.淋膜模具.喷丝格子模具.板中空板（阳光板）模具.各种快速不停机换网器.计量泵．分配器

The size of the filament depends on the rate of flow through the hole of the spinneret rather than on the size of the hole.

所制成长丝的直径取决于粘胶在喷丝头孔中的流速，而不取决于孔径的大小。

Improvement the Quality of Home-made Spinneret Used in Wet Spinning

提高湿法纺国产自制喷丝头的质量

The die-swell mechanism of polycarbasilane(PCS) melt for a spinneret with Y-shaped orifice and the effect of die swelling of PCS on the profile degree (PD) of Y-shaped SiC were investigated.

摘要研究了聚碳矽烷(PCS)熔体在Y型喷丝孔中的挤出胀大机理、膨胀模型以及膨胀比对Y型碳化矽纤维异形度的影响。

STUDY ON FORMING TECHNOLOGY OF BRIGHT POLYESTER FDY EXTRUDED FROM SPINNERET SLIT

有光涤纶FDY狭缝挤出成型生产技术研究

The paper states the feature and technical innovation of the spinneret pack on NOY high speed spinning machine, as well as results of its application.

本文介绍了NOY高速纺丝机纺丝组件的结构特征，结合生产提出技术改造方案及其生产应用情况。

In this paper, the influence factors of spinning acetate fiber by the dry process using Y type spinneret of 0. 04-0. 03-500 holes were analysed.

本文分析了500孔Y形喷丝板于纺二醋纤的影响因素，认为在纺丝溶液中加入适量的助剂A对纺丝有利；

The process of spinpack of high-speed spinning in nyloy was probed into. The selection of spinneret,filter and sealing material were discussed especially.

本文对锦纶高速纺中组件工艺的选择作了探讨，着重讨论了喷丝板、过滤介质和密封介质的工艺配合。

In this paper.the relationship between capillary configuration ot spinneret and spinnability was studied under POY-DT production of lustrous "Y"- fiber.

本文讨论了在三叶有光POY-DT生产过程中，喷丝板毛细孔尺寸与可纺性的关系。

Floss spinning, wool spinning and chemical fiber equipment such as : combine, drawing frame, floss comber, fiter, carding machine, spinneret, measure pump, etc.

棉纺类有清梳联合机、并条机、棉精梳机及滤尘设备；毛纺类有梳理机、制条机、精纺成套设备；化纤类有喷丝头、计量泵、混条、制条等设备。

Keywords PET filament;spinneret;rheological behavior;shear rate;draw ratio;spinneret back pressure;

涤纶长丝;喷丝板;流变性;切变速率;拉伸比;背压;

Selection of spinneret for PET filament production

涤纶长丝生产中喷丝板的选用

Keywords cleaning technologie;spinneret;filter elements;

清洗技术;喷丝板;过滤部件;

Meltblown law, such as bonded non-woven fabric with spinneret spinning;

熔喷法、纺粘法等各种非织造布纺丝用喷丝板；

The reason for plugging the spinneret was analyzed.The cleaning methods were also introduced in details.TEG was used for cleaning the melt distribution channels of POY device.

用三甘醇清洗堵塞的POY装置熔体管道，分析了熔体管道堵塞的原因，详细介绍了清洗方法。

When the machine is used to strengthen some chemical reactions such as cleanout of spinneret and SiO2, the result is certified better than using other methods.

用于强化其它一些化学反应，也有极好效果，用于清洗喷丝头，速度快，质量好，用于清洗二氧化硅，证明比其它方法效果更好。

Electrospinning works by connecting a needle-like spinneret to a high-voltage power source and releasing a charged liquid from it towards an earthed collector plate.

电纺的工作方式是将一根针状喷丝头连上高压电源并从中对一个接地的收集器释放出一股带电液体。

There are many methods to produce blended yarn, but to produce blended yarn through one spinneret is more economical and with better effects compared with other methods.

目前多异混纤纱的生产方法有多种,但是较之其他多种方法,利用同板生产则更具经济性和良好的效果。

tubular spinneret

管状蜡器,管状纺丝器

The solution is filtered and prmped through the fine holes of a spinneret.

纺丝液经过滤后，借助于泵的压力穿过喷丝头的细孔。

Results showed that the LCP phase structure was affected by the LCP concentration,viscosity,shear and elongational stress,size and shape of the spinneret,the use of compatible agent,etc.

结果显示在采用液晶高分子强化聚丙烯纤维的过程中,液晶相的浓度、粘度、熔体的剪切和拉伸张力、喷丝头形状、相容剂等因素对液晶相结构的形成有很大的影响。

Rheological characteristic and shear rate of mesophase pitch in microhole passage of spinneret during melt spinning for preparation of large diameter mesophase pitch filament were investigated.

考察了大直径中间相沥青纤维熔纺过程中中间相沥青在喷丝板微孔区内的流动特性及剪切速率。

Keywords polyacrylonitrile fiber;non-circular fiber;stretch;spinneret;cross section;

聚丙烯腈纤维;异形纤维;拉伸;喷丝板;截面;

Keywords lyethylene terephthalate fiber;diameter;spinneret hole;pre-oriented yarn;birefringence;

聚对苯二甲酸乙二酯纤维;直径;喷丝孔;预取向丝;双折射率;

Keywords polyester industrial yarn;HMLS;spinneret parameter;draw-point localizer;heat setting;

聚酯工业丝;高模量低收缩;喷丝板参数;拉伸点定位;热定型;

Keywords polyester garbage;triangular heteroclite dacron short fibre;shape of spinneret;hetercliteness of the intersecting surface of the fibre;gloss;scintillating effect;

聚酯废料;三角形涤纶短纤维;喷丝孔形状;截面异形度;光泽度;闪光效果;

Many tiny tubes connect each silk gland with a spinneret

许多极细小的导管把每个造丝腺体与吐丝器相连。

The key technical conditions for the design of shaped spinneret plates and the influence of various spinning conditions on fiber modification ratio during the shaped fiber development are discussed.

论述了异形喷丝板设计的技术关键条件和异形纤维开发中各种纺丝条件对纤维异形度的影响。

The result indicates that the desired flat-like polyester filaments can be made by an reasonable design for spinneret micro-hole and high-speed spinnin g.

试验结果表明,通过合理的微孔设计,在高速纺丝条件下,可制得理想的狭扁形涤纶长丝。

In this system,the image of the holes on the spinneret were zoomed in and stored for post-processing.

该系统通过显微镜对喷丝孔进行放大成像并采集保存。

It was p ointed out that the fiber denier and spinneret should be taken into consideratio n while selecting spinning velocity.

调整生产能力要根据产品纤度、现有喷丝板的情况来选择适当的纺丝速度，也可通过改变喷丝板孔数来实现。

Filter and spinneret pack can be easily replaced.

过滤器和喷丝头组件可以容易的替换。

Shine and flat polyester staple fiber was produced by using profiled spinneret and special spinning and drawing process.

通过异形喷丝板的设计及特殊纺丝和后拉伸工艺生产了闪光扁平涤纶短纤维。

Keywords acetate fiber;Y type spinneret;hole naumber;

醋酸纤维;Y形喷丝板;孔数;

Using NaSCN as solvent,acrylic fiber was produced by one-step wet spinning process.The effect of spinneret negative draw ratio on fiber formation was discussed.

采用硫氰酸钠为溶剂,湿纺一步法工艺生产腈纶,探讨了喷丝头负拉伸率对纤维成形的影响。

用作名词(n.)

Filter and spinneret pack can be easily replaced.
过滤器和喷丝头组件可以容易的替换。

The tantalum spinneret is a key part in chemical fibre silk spinning_machine.
喷丝头是化纤纺织机上的关键部件。

---