hypoeutectoid是什么意思   hypoeutectoid怎么读

hypoeutectoid单词基本解析：

hypoeutectoid变化用词：

hypoeutectoid英英释义：

hypoeutectoid中文词源：

hypoeutectoid用法和例句：

hypoeutectoid

2 Regularity of Structural Superplasticity of Hypoeutectoid Steel[J]; Journal of Iron and Steel Research(International); 2005年04期; 63-65

5贾书君,曲鹏,翁宇,张静波,陈红桔,刘清友;磷和晶粒尺寸对低碳钢力学性能的影响[J];钢铁;2005年06期;61-65

hypoeutectoid uranium niobium alloy

亚共析U-Nb合金

hypoeutectoid alloy

亚共析合金

Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

亚共析度碳和低合金钢状态转换的定量测量和报告惯例

hypoeutectoid microstructure

亚共析组织

Keywords hypoeutectoid steel;compound principle;deformation strengthening;

亚共析钢;混合物法则;形变强化;

Simulation of Deformation Strengthening Curve of Hypoeutectoid Steel

亚共析钢形变强化曲线模拟

Observation and analysis of feathery austenite of hypoeutectoid steel

亚共析钢羽毛状奥氏体观察与分析

Research on the hereditary phenomena of widmanstatten patterns in hypoeutectoid steels

亚共析钢魏氏组织的组织遗传现象研究

hypoeutectoid steel

低碳钢

Keywords hypoeutectoid steel;carbide;spheroidization;fine rolling;

关键词亚共析钢;碳化物;球化;精轧;

The hypoeutectoid graphitized free cutting steel was proposed.

具有亚共析组织的钢种其石墨化过程一直很难，因此该钢种开发的关键是促进其石墨化过程。

The feasibility of inner crack intercritieal heat treatmemt in hypoeutectoid steel was analysed in detail by metallurgical principle.

利用金属学原理,分析了亚共析钢内裂纹亚温愈合处理的可行性。

Keywords austenite forming;kinettics equations;critical region;hypoeutectoid steels/activation energy;

奥氏体成形;动力学方程;临界区;亚共析钢/激活能;

Keywords spheroidization annealing;heat treating equipment;energy saving;hypoeutectoid steel;

球化退火;热处理设备;节能;亚共析钢;

The hardening gradient and the character of abrasion in hardening layer of hypoeutectoid steel with two kinds of matrixes that was treated by laser beam have been studied.

研究了两种基体的亚共析钢经激光处理后,其硬化层的硬度梯度及其磨损特性。

Keywords adiabatic shear band;hypoeutectoid steel;SHPB;hat-shaped specimen;heat treatment;

绝热剪切带;亚共析钢;SHPB;帽型试样;热处理;

Strain of the Proeutectoid Ferrite in Hypoeutectoid Steel During Drawing Tested by Quantitative Metallography

采用定量金相法分析亚共析钢拉拔变形中先共析铁素体应变量

The strain of the proeutectoid ferrite in hypoeutectoid steel drawing was measured and analyzed by quantitative metallography.

采用定量金相法分析计算了亚共析钢拉拔变形中先共析铁素体应变量。

Influence of ferrite content on adiabatic shear deformation of hypoeutectoid steel

铁素体含量对亚共析钢绝热剪切变形的影响