hobbing单词基本解析：

n.铣刀，齿轮滚铣刀v.炉盘（炉具上部供放置锅、壶等以加热的平面）( hob的现在分词 ); （尤指旧时）（壁炉侧面供锅、壶等加温用的）平面金属架
n. 滚刀(切压制模法, 滚齿机)
n.铣刀，齿轮滚铣刀；

hobbing变化用词：

hobbing英英释义：

动词 hob:

cut with a hob

同义词：hob

hob[ 'hɔbiŋ ]n.(folklore) a small grotesque supernatural creature that makes trouble for human beings

同义词：goblinhobgoblin

(folklore) fairies that are somewhat mischievous

同义词：elfgremlinpixiepixybrownieimp

a hard steel edge tool used to cut gearsa shelf beside an open fire where something can be kept warmv.cut with a hob

hobbing中文词源：

hobbing用法和例句：

hobbing

"Have another glass? ""With you, hob and nob, " returned the sergeant .

"再来一杯吗？""遵命，彼此干一杯，"伍长回答说。

"Have another glass?""With you, hob and nob, " returned the sergeant.

"进屋来吧，我来给你们煮 一杯 热可可茶。

HiN, HoN, HoA, HiB, HoB and HiA accounted for 29.7%, 26.5%, 21.1%, 13.4%, 5.1% and 4.2% of DOC, respectively.

DOM中HiN、HoN、HoA、HiB、HoB及HiA的含量分别为 2 9 7% ,2 6 5% ,2 1 1% ,13 4% ,5 1%及 4 2% .

"Have another glass?" "With you, hob and nob," returned the sergeant.

“再来一杯吗?”“遵命，彼此干一杯，”伍长回答说。

Hob and nob, Doctor, which do you choose, white or red?

一起干一杯，医生，白酒还是红酒?

"Have another glass"With you,hob and nob"returned the sergeant.

一起干一杯，医生，白酒还是红酒？

Mary raised hob with her husband for being back late.

丈夫回来晚了，玛丽就对他大发脾气。

The design and calculation of triangular spline hobbing cutter is very complicated.Computer programs are programmed accordingly based on the calculation steps and formulas.

三角花键滚刀设计计算十分繁琐,把数据计算步骤与公式设计编制成计算机程序。

Strictly speaking,theworm surface of the hob must be an involute helicoid which possesses an intersectingcurve in axial plane convex.

严格地说,渐开线齿轮滚刀的基本蜗杆曲面应是渐开线螺旋面,其轴断面内的截线是一条中凸的曲线。

The affection to hobbing and shaving accuracy, and the cause of shaving concave are analyzed in the text.

主要对影响滚、剃齿精度、引起剃齿中凹的原因进行了分析。

Taper of hob arbor fitting Morse no.

主轴锥孔。

Sophisticated technology products, style, beauty, luxury, ordinary type, Mubing, plastic handle, pull teeth, hobbing, complete specifications.

产品工艺精良，样式美观，有豪华型，普通型，有木柄，塑柄，拉齿，滚齿，规格齐全。

The paper suggests a new method of cutting involete spur on gear hobbing machine by hobbing cutter with double-disk.

介绍了一种用圆盘双排滚切刀在滚齿机上连续展成滚切渐开线直齿圆柱齿轮的新方法。

The paper introduces a rapid calculation for gear change using ordinary function calculation in hobbing cylindrical straight gears with a teeth number greater or twice than a prime number over 100.

介绍了一种用普通函数计算器快速计算滚切齿数大于100的质数及其整数倍的直齿圆柱齿轮的挂轮。

Gives a new method which designs tooth forms of pre-grinding hob according to thepartical demands on hob of gear,and designs a kind of pre-grinding hob used in high-speed trac-tion gears.

介绍了一种计算与作图相结合的直齿锥齿轮粗铣刀齿形设计方法,推导了精确计算公式,详述了计算步骤和计算机作图方法,并给出了设计实例。

This paper produces a new way of grinding the hole of a helix flute Archimedes spiral hob: a bob is orientated in three tapers.

介绍了一种采用三圆推销定位磨削阿基米德螺线滚刀内孔的新方法，该方法避免了圆周齿距误差和螺旋槽导程误差的影响。

The paper give out a new structure of non-relieved gea r hob and its design procedures. It makes the design and manufacture of this kin d of cutter become possible.

介绍了一种集工艺刀夹与刀体于一体的转位式圆磨法滚刀的结构，并对该刀具设计的关键问题--刀槽和刃形的设计计算进行了公式推导。

The paper introduces the method and application of non-differential hobbing helical cylindrical gear.

介绍了无差动滚切斜齿圆柱齿轮的方法及应用。

The computing method for calculating the axial edgeof the spherical hob is introduced, and the formulae of basic parameter are presented.

介绍了球形滚刀轴向廓形的设计方法,给出了滚刀基本参数的计算公式。

The structure, principle and application of a simple centring device used for the sharpening of hob cutters are described.

介绍了用于刃磨齿轮滚刀的简易对中装置的结构、原理及使用方法。

Profile formula for hard gear chamfered edge hob and its error analysis are introduced. A new kind of chamfered edge hob structure and manufacturing engineering are investigated.

介绍了硬齿面滚刀倒棱的齿形计算公式和误差分析，探讨了新型的倒棱滚刀结构方式及制造工艺。

This paper introduced the calculation of the maximum undercut and the involute length of gear after cutting with gear cutter hob.

介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。

The cutting principle and the optimum design mathematical model of such non-feeler preshaving hob are introduced and effect of the design is validated by its example.

介绍了这种无触角剃前齿轮滚刀的切削原理、优化设计数学模型,并通过实例验证了设计效果。

And it introduced the relation gear tooth concave hole parameter and hob used of tooth cut and rub tooth surplus and match gear geometry parameter.

介绍了齿轮齿根凹圆坑参数与所用滚刀的关系。

The article starts from the features of the tapered involute spline analyses the characters of hob design, expounds the main steps in the tapered involute spline hob design.

从锥底渐开线花键的特征着手,分析了滚刀设计的特点,给出了锥底渐开线花键滚刀设计的主要步骤。

Contrary to all advice he gave up his hob and left for the south.

他不所任何劝告,辞了工作,去了南方。

He is going to go out and raise hob.

他今晚要出去纵情狂欢了。

He turned from the tray, lifted the kettle off the hob and set it sideways on the fire.

他把视线从托盘移开，取下炉架上的开水壶，将它侧着坐在炉火上。

His absence played hob with our party.

他的缺席打乱了我们的晚会。

Taking Pro/ENGINEER software as a platform, the case based turbine hob CAD system is developed by using case based reasoning (CBR) technology.

以Pro/ENGINEER软件为平台 ,采用实例推理技术开发了基于实例的蜗轮滚刀CAD系统。

Based on the point that the speeds of the hob and gear are equal along the tangent line at the cutting point, which is consistent with pure rolling between the pitch curves of the hob and gear, a group of equations is set up.

以切削点处工件和刀具的切向速度相等(滚刀节曲线和非圆齿轮节曲线保持相互纯滚动)基本依据，推导出坐标轴联动控制的一组方程式。

You can right click on the file names ands are generally 1.5Mbkto 3.5Mb each. It's about 2.15Mb for each hob of sermon.

你可以在该档案处按老鼠右键,再选择'另存目标',视窗会问你储存的地方.储存后可用视窗媒体播放程式来播放.

Do you notice the hob - and - nob character of their friendship?

你注意到他们之间亲密的友谊吗?

The binding technique for hob cutter inserts is useful for small and middle tool works.

其中，关于滚刀刀片的粘结工艺对中小工具厂家有借鉴意义。

At the geometry parameters of hobbing cutter, tooth shape design, regrinding the precision of shape of tooth and standards etc. respects, have carried on extensive and deep research.

其创新点在于：在滚刀的几何参数方面，论证了减小滚刀的直径可以提高滚刀与齿轮的范成速度、缩短切入切出时间，加长滚刀的长度可以提高滚刀的使用寿命，并给出了设计依据；

In this paper,a new methd about the design of triangular spline hob cutter with chamfer has been introduced.

具有倒角的三角花键滚刀的设计一直采用近似的方法。

Then,the axial-section profile equation of grinding wheel that is used to relieve hob is derived from relieving surface and the reliving moving relation between wheel a...

再利用齿背曲面和铲磨运动的关系求出铲磨滚刀的砂轮轴向截面廓形,并给出了负前角双圆弧滚刀铲磨砂轮截面的具体算例。

This paper analyses the source of the hobbing gear error and provides the revised quantity of the hobbing cutter for the medium_hard gear according to calculation result and materials concerned.

分析了滚齿齿轮齿形误差的来源,并根据计算结果和有关资料给出了滚切中硬齿面齿轮用滚刀的修形量。

The Liebherr-Gear Hobbing Machine LC 150, mounted in India, found special echo at the trade fair in Bangalore.

利勃海尔滚齿机LC 150在印度Bangalore(班加罗尔)的展会上,发现了特别的回波。

Adopts the high-speed dry gear milling by flying cutter to simulate the gear hobbing using metal-cutting theory,sets up a cutting force model and derives the calculating formula of the milling force.

利用金属切削理论,采用高速干式飞刀铣齿模拟滚齿切削过程,建立飞刀铣齿切削力模型,推导出飞刀铣削力的计算公式。

Oh, Hob, I'd like you to meet Sheila Rhoda, a famous film star in Hollywood.

哦，霍伯，我想要你见见好莱坞著名影星，希拉·罗达。

Oh, hob,I'd like you to meet sheila rhoda, a famous film star in hollywood.

哦，霍伯，我想要你见见好莱坞著名影星，希拉罗达。

In power gear transmission, the equation of the basic rack profile must be known in general.It"s the equation of the hob and the gear profile that need be deduced.

在动力齿轮传动中，滚刀的设计一般是已知基本齿条的齿廓方程，求解的是滚刀和齿轮的齿廓方程。

A cored apple, filled with brown sugar , roasting for her at the hob on a dark autumn evening.

在昏暗的秋日傍晚，炉架上为她焙着的一个去了核、填满红糖的苹果。

On the base,it also put forward the suggestion to correct the convex angle size of preshaving hob cutter.

在此基础上,提出了剃前滚刀凸角尺寸修改的建议。

On the basis of studying the structure of direct-drive hobbing machines,to analyze its main reason and source of error for producing geometric error so as to establish the geometric error model.

在研究零传动滚齿机结构的基础上,分析产生几何误差的主要原因和误差来源,以此建立了几何误差模型;

On artistic style, can imitate " Luo Shi " the balcony, do net of some of small hob, iron to climb add wall, kind liana, form portable chic green wall.

在艺术风格上，可以模拟“罗式”阳台，做些小铁架、铁网攀附墙壁，种藤蔓植物，形成一幅可移动的别致绿墙。

Its innovation is clicked and lain in: In geometry parameter of the hobbing cutter, the diameter of reducing the hobbing cutter can im...

在重磨齿形精度方面，适当改变设计偏距，可以提高滚刀的重磨精度、增加重磨次数、延长滚刀的使用寿命。

Type Zbar, circular shaping plate, line-press wheel, circular hobbing cutter, draw line cutter, rolling-wheel for sealing can, tensile concave die, punching cutter.

型杆，成园板，压线轮，圆滚刀，划线刀，封罐滚轮，拉伸凹膜冲裁刀，翻边缩径膜。

Study on Open CNC Gear Hobbing System Based on DSP

基于DSP的开放体系数控滚齿系统的研究

Based on the preshaving hob cutter spotal structure, authors analyse thecalcuiation two kinds of contact ratio on hob-shaving technology,and give the commutingformulae and examples.

基于剃前滚刀特殊结构，分析了滚-剃工艺下二种重合度的计算问题，给出了计算公式和实例。

At present,we have 53 imported machine tools (slotter) and introduce the equipment of CNC processing center and hobbing machine form Germany.

多年来，承蒙各界朋友支持，使之发展成大陆较大规模的专业制做针筒的厂家。

And,having placed the former on the hob,drew in her seat,evidently pleased to find me so companionable.

她把盆子放在炉台上后，又把椅子拉过来，显然发现有我作伴而高兴呢。

She dragged herself to the stove and shifted the kettle from the hob to the hotplate.

她拖着沉重的脚步走到电炉前，把水壶从架子上拿下来，放到炉子上。

She raised such hob with her questions that the meeting broke up.

她拼命提出各种问题使会议流产了。

Actual hobbing pitch circle diameter

实际滚切节圆直径

The errors of the six-axis hobbing machine and between two components after the relative linear movement and relative rotative movement were analyzed.

对六轴数控滚齿机进行误差分析,利用齐次坐标转换和坐标旋转的方法,得到六轴滚齿机的误差数学模型。

The profiling error of a new type skiving hob with convex curved rake face is analyzed and the change law of profiling error affected by parameters is expounded.

对新型凸曲前刀面刮削滚刀的理论构形误差进行了全面分析,探讨了各特征参数对构形误差的影响规律。

The undifferential hobbing technology for helical cylindrical gear was systematically analyzed,and a new method to hob helical cylindrical gear with undifferential method was introduced.

对无差动滚切技术进行了系统的研究,提出了一种用无差动法滚切斜齿圆柱齿轮及其挂轮选择的新方法。

Vertical outline hob can be defined as a series of change site screw gear, and process error is eliminated as possible.

将其定义为一系列变位的螺旋齿轮，并尽可能消除工艺误差。

Fine pitch automatic crown gear hobbing machine

小模数齿轮自动铣齿机

The paper inquires into the rules of formation of the tooth surface of a crowned gear on conjugate hobbing.

就共轭滚切鼓形齿轮时其齿面形成的规律进行了探讨，成功地解决了三自由度啮合的鼓形齿面求解问题。

The establishment of model of normal hobbing process and the input of error factors have been discussed on this difficult point.Mathematic modelling upon motion relation between cutter and gear...

就这个难点,讨论了正常滚齿过程的模型建立和误差因素的输入,重点提出了存在运动偏心时刀具和轮坯之间运动关系的数学建模,最后考察了周节累积误差和运动偏心量的关系。

Select Change Cear of Hobbing Machine With Computer

应用微机优化选配滚齿机挂轮

CAD is applied to the design of spherical hob, and the result is satisfactory.

应用计算机辅助设计,并通过实例计算,得到了满意的结果。

Based on the above technologies, the CNC system for the generation motion of gear teeth profiles is developed and used on the CNC reconstruction of Y38A hobbing machine.

开发了功能齿廓曲面展成运动的全闭环数控电轴传动链和同步控制系统,并成功用于Y38A型滚齿机的数控化改造。

We firmly believe that the user received from the factory are "the most reliable, efficient, most economical," the hobbing machine and the spline shaft milling.

我们坚信用户从本厂得到的是“最可靠、高效率、最经济”的滚齿机和花键轴铣床。

I was just going to give Hob a private lesson.

我刚准备给霍布单独上一次课。

I plant the existing car wash, planing, boring, hobbing, heat treatment, and other mechanical equipment, more than 60 Taiwan.

我厂现有车，洗，刨，镗，滚齿，热处理等各种机械设备60余台。

I know Hob won't believe this, but it's true.

我知道霍布是不会相信这一点的，但这是千真万确的。

The war raised hob with international trade.

战争破坏了国际贸易。

According to the capability of CNC,the synchronizing technique with master-slaver structure based on the software interpolation is fit for direct-drive gear hobbing machine.

指出根据现代数控系统的性能,基于软件插补的主从式同步控制方法最适合于这样的滚齿机;

An improved algorithm based on the equal arc length method is presented to solve substitutive arc parameters of spline hob curve section.

提出一种基于等弧长法的改进算法,用于求解花键滚刀理论齿形的代用圆弧参数。

It is necessary to develop direct-drive gear hobbing machine.

提出了研制基于直接驱动技术滚齿机的必要性;

This paper puts forward a design method of pulley hob with parabolic tooth shape, which is used in the high torque drive.

提出了高扭矩抛物线齿同步带轮滚刀齿形的设计方法。

A new calculating method of axial tooth angle is put forward, which leads to forming error distribution of hob tooth forms.

提出新的轴向齿形角计算方法，使滚刀刀齿形误差分布较为合理。

The article starts from the features of the tapered involute spline analyses the characters of hob design, expounds the main steps in the tapered involute spline bob design.

摘要从锥底渐开线花键的特征着手，分析了滚刀设计的特点，给出了锥底渐开线花键滚刀设计的主要步骤。

The wastage morphology and reasons of gear hob used in production are analyzed, the influence of the varying hobbing torque and temperature on wastage of hob is discussed in hobbing process.

摘要对生产中使用的齿轮滚刀磨损和破损形貌进行了分析，探讨了滚刀磨损和破损的原因及滚齿过程中滚削力和滚削温度的变化对滚刀磨损和破损的影响。

The mathematic models on automatic programming of gear hobbing were estabilished.

摘要建立了圆柱齿轮滚齿自动编程数学模型，提出了数控滚齿自动编程方法。

numerical control horizontal gear hobbing machine

数控卧式滚齿机

---