graphitization是什么意思   graphitization怎么读

graphitization单词基本解析：

graphitization变化用词：

graphitization英英释义：

graphitization中文词源：

graphitization用法和例句：

graphitization

Study on the degree of graphitization for carbon-carbon composites[J].Carbon, 1998, 93(1): 8-11.

C/C复合材料石墨化度的研究[J].炭素,1998,93(1):8-11.

Keywords chemical liquid-vapor deposition （CLVD）;carbon-carbon composite （C/C）;friction property;pyrocarbon;graphitization;

CLVD法;C/C复合材料;摩擦磨损;热解炭;石墨化度;

Preferred orientation of PAN-based carbon fibers during continuous graphitization

PAN基碳纤维连续石墨化过程中的取向性

The TPO result indicated that the graphitization degree of the CNF depended on the active metal composition.

TPO结果表明 ,Fe的存在提高了纳米碳纤维的石墨化程度 .

primary graphitization

一次石墨化

Catalytic graphitization of a medium temperature pitch - derived carbon

中温沥青炭的催化石墨化

the lengthwise graphitization

串接石墨化

Lengthwise graphitization furnace

串接石墨化炉

secondary graphitization

二次石墨化

Keywords artificial neutral network;carbon-ceramics composite material;graphitization;material properties;

人工神经网络;碳/陶瓷复合材料;石墨化;材料性能;

catalytic graphitization

催化石墨化作用

eutectoid graphitization

共析石墨化

Carbon foam is a novel thermal management material which is produced from mesophase pitch, and possesses high thermal conductivity after carbonization and graphitization.

具有高导热、低密度的新型高性能碳泡沫是最近发现的一种高新材料,它以中间相沥青为前驱体,然后发泡、碳化、石墨化制得。

The main features of CNTs contain highly-perfect graphitization structure and high specific surface area.

兼具高石墨化程度以及高比表面积是奈米碳管的特性。

Lengthwise graphitization process

内串石墨化

The choices of parameters of transformer, secondary output voltage, maximum output current, capability, voltage regulating progression and step voltage are the crucial factors, which determines the degree of LW graphitization process.

内串石墨化工艺的关键设备是变压器，变压器的参数：二次输出电压、最大输出电流、容量、调压级数、级差电压选择的合理与否，决定了内串石墨化工艺水平的高与低。

DISCUSSION ON QUALITY CONTROL DURING LENGTHWISE GRAPHITIZATION PROCESS

内串石墨化质量控制的探讨

It is found that graphitization induced instability of the crystal lattice is the main reason for laser induced damage.

分析了不同激光工作参数对金刚石薄膜的激光损伤机理,认为石墨化导致晶格失稳是金刚石薄膜激光损伤的主要原因。

THE DETERMINATION OF GRAPHITIZATION DEGREE AND ITS TESTING STANDARD OF CARBON ANODE FOR FLOURINE PRODUCTION

制氟用炭阳极石墨化度的确定及其检测标准

Keywords metamorphism graphitization eutectics supercooling high carbon equiv alant;

变质;石墨化;共晶过冷;高碳当量;

It can be used to poiduce filling ring, graphit, strips, sealing mat, complex board, cylinder mats, etc.

可制做各种石墨填料环、带材、密封垫片、复合板、汽缸垫等。

Keywords malleable cast iron inoculant graphitization at first stage decomposition of eutectic cementite;

可锻铸铁;孕育剂;第一阶段石墨化;共晶渗碳体分解;

New Process of Low Temperature Graphitization for Malleable Iron

可锻铸铁低温石墨化退火新工艺

solid-state graphitization

固态石墨化

In our country, the graphitized electrode production mainly uses Acheson graphitization furnace, which has the disadvantage of long production cycle, large power consuming, low efficiency and control technique.

国内生产石墨电极主要采用的是艾奇逊石墨化炉，该石墨化炉生产周期长、能耗大、效率低，而且控制技术相对落后。

There was an initial experiment research of the graphitization in solidification process of molten cast iron treated by EPM process.Through the research, some results were discovered.

在未加任何孕育剂的情况下,铸铁铁液经过脉冲电场处理后,在凝固过程中发生了石墨化转变;

In Chapter 5, graphitization of the a-CNT and the porous CNT generated both tubular and fibrous products but with different yields.

在第五章中，非晶质奈米碳管与孔洞型奈米碳管经过石墨化后会得到不同比例的管状与纤维状产物。

Effect of Graphitization Degree of Crucible on SiC Single Crystal Growth Process

坩埚石墨化度对SiC单晶生长过程的影响

The further analysis indicates that the main reason resulting in the decreasing velocity is that graphitization weakens the inter-atomic bonding force and cuts off the continuity of the body.

声速降低的根本原因在于石墨化削弱了原子间结合力，割断了基体的连续性。

Keywords C/C composite;coal tar pitch;impregnation;graphitization;carbonyield;

复合材料;煤沥青;浸渍;石墨化;残炭率;

Keywords C/C composites;chopped high modulus carbon fiber;disperse;graphitization degree;

复合材料;短切高模炭纤维;分散;石墨化度;

Keywords C/C composite;graphitization degree;laser Raman microspectroscopy;XRD;

复合材料;石墨化度;显微激光喇曼光谱;XRD;

The graphitization degree is one of the most important structural parameters of C/C composites.But it is difficult to be exactly measured for their multiformity.

复合材料的石墨化度反映了材料中碳结构与理想石墨晶体结构的接近程度，并且是影响其性能的一个重要结构参数。

densification and graphitization degree

密度和石墨化度

Two types of petroleum coke were heated with different maximum heat treatment temperature ( T H,max ),the structure,morphology and graphitization degree of these samples were analyzed by means of XRD,SEM and Raman spectrum.

对两种不同的石油焦进行了高温热处理 ,采用 X射线、扫描电镜和 Raman光谱研究了经不同高温热处理温度 (TH,max)处理过的试样的结构、形貌、织构与石墨化度。

Traditionally, graphitization analysis is mainly performed through observing metallographic samples under microscope, and conclusions are drawn by comparing them with standard metallograph.

对碳钢部件石墨化程度的测评, 多采用传统的方法, 就是在显微镜下进行观察并与标准图谱相对照而得到石墨化评级结论。

Widey applied in Chlorine,Alkail,Al,Mg,Cu,Mn,electrolytic water,graphitization,siliconcar-bonization and DC are furnace.in which tremendous DC current is required.

广泛使用于氯,碱,铝,镁,铜,锌,镍,电解水,石墨化,碳化硅,及直流电弧炼钢等行业需要强大直流电源的场合.

stress graphitization

应力石墨化

Thirdly, the degree of graphitization of SHC was higher than that of RHC.

慢速热解煤焦比快速热解煤焦的石墨化程度大；

Effects of annealing in the high magnetic field on the mechanical property of spheroidal graphite cast iron, the dissolving of the cementite and the graphitization of carbon were investigated.

摘要研究了强磁场对退火处理球墨铸铁力学性能以及渗碳体分解、碳扩散的影响。

The study on graphitization degree,porosity(volume density),purity,resistance coefficient and crystal structure etc of graphite is summarized.

文章针对人造金刚石用石墨材料主要性能的研究进行了综述,包括石墨化度、气孔率(体积密度)、灰分(纯度)、电阻率以及晶体结构等等。

The hydrocarbon formation of organic matter is closely affiliated with the exotic hydrogen which enhances the conversion rate of hydrocarbon and retards the graphitization of organic matter.

有机质成烃过程与外源氢的加入密切相关，外源氢的加入提高了成烃转化率，抑制了有机质的石墨化进程。

Thephenomenon of graphitization has been studied by the method of surface analysis.It has been found that amorphous carbon is produced along with thegraphitization process of diamonds.

本文对此石墨化现象进行了表面分析,发现在金刚石晶粒表面石墨化过程中,伴随着无定形碳的形成。

This paper anslyses the harmonic contents under all operating modes theoretically according to the load characteristics of the in-series graphitization and gives a reasonable trestment proposal.

根据串接石墨化整流系统的负荷特性，从理论上分析了各种运行状态下的谐波含量，提出了合理的治理方案。

By expand principle of graphitization and using inner riser,the expund of ballizer is carried out in the model and cast of fine and close intexture form.

根据球墨铸铁球化时石墨化膨胀原理,利用暗冒口使球化膨胀只能在型内膨胀,从而形成组织致密的铸件;

Keywords Pitch derived carbon;C/C composites;carbonization;structure;graphitization;

沥青炭;炭/炭复合材料;炭化;结构;石墨化;

DISCUSSION ON CHOICE FOR INDEX OF COMMUTATION EQUIPMENT IN LENGTHWISE GRAPHITIZATION

浅析内串石墨化整流变压器参数的选择

Keywords C/C composite;multi-coupling fields CVI;densification and graphitization degree;microstructure;

炭/炭复合材料;多元耦合场CVI;密度和石墨化度;微观结构;

Keywords carbon/carbon composites;friction surface;stress graphitization;

炭/炭复合材料;摩擦表面;应力石墨化;

Keywords carbon-carbon composite;heat treatment;microstructure;heat transfer coefficient;graphitization degree;tribological properties;

炭/炭复合材料;热处理;微观结构;导热系数;石墨化度;摩擦磨损性能;

Keywords C/C composite;graphitization degree;XRD;SEM;bending strength;fracture mechanism;

炭/炭复合材料;石墨化度;XRD;SEM;抗弯强度;断裂机制;

Keywords C/C composite;graphitization degree;property;

炭/炭复合材料;石墨化度;性能;

During carbonization and consequently graphitization of foams, cell diameter reduces and the orientation of molecules in cell walls improves, approaching that of graphite.

炭化和石墨化后泡沫炭的孔径减小,孔壁片层取向接近石墨;

EFFECT OF GRAPHITIZATION DEGREE ON THE ARC ABLATE RATE OF DIFFERENT CABON SLIDE MATERIALS

炭滑板的石墨化度对电弧烧蚀速率的影响

Keywords carbon cathode graphitization catalytic;

炭阴极;石墨化度;催化;

With the increase of content of flow domain type texture, the graphitization degree increases, but SBET decreases.

煤沥青炭中含有流线型结构越多，则其石墨化度越高，比表面积越低；

Effect of stress graphitization on the microstructure and mechanical properties of graphite fibers

牵伸石墨化对石墨纤维结构和力学性能的影响

Keywords Spheroidal graphite malleable;Chemical composition;Graphitization time;Kinetics equation;Regression analysis;Ferritization rate;Measuring method;Tace element;

球墨可锻铸铁;化学成分;石墨化时间;动力学方程;回归分析;铁素体化率;测量方法;微量元素;

Keywords Ductile iron;Low temperature impact toughness;Alloying;Graphitization;

球墨铸铁;低温冲击韧度;合金化;石墨化退火;

Keywords nodular iron;austenite;graphitization;ferrite;cementite;pearlite;bainite;ledeburite;

球墨铸铁;奥氏体;石墨化;铁素体;渗碳体;珠光体;贝氏体;莱氏体;

Research on graphitization conversion of anthracite coal with X-ray diffraction method

用X射线衍射法研究无烟煤的石墨化转变

3、All the bolts and screw holes of flanges must be supplied with graphit and moly bdenum disulphide to prevent.

由于吹灰器所处环境恶劣，所有法兰的螺栓、螺母的螺纹表面应涂抹石墨油脂或二硫化钼油脂加以保护。

current graphitization

直流石墨化

STUDY ON GRAPHITIZATION BEHAVIOUR OF SHORT CARBON FIBER/PHENOL-CARBON COMPOSITE MATERIALS

短炭纤维/树脂炭复合材料石墨化行为的研究

Keywords Graphitization;furnace resistance;control;

石墨化;炉阻;控制;

Keywords Graphitization;Acheson graphitization furnace;AC graphitization;DC graphitization;inside heattype LW graphitization;

石墨化;爱奇逊石墨化炉;交流石墨化;直流石墨化;内串石墨化;

Keywords graphitization;nodularization;cast iron electrode;

石墨化;球化;铸铁焊条;

Keywords graphitization;nodularization;Ni-Fe cast iron weld metal;

石墨化;球化;镍铁型铸铁焊缝;

graphitization molecular sieve

石墨化分子筛

graphitization degree

石墨化度

The smooth and dense lubricating film was formed on the surface of the sample with high graphitization degree, which resulted in the decreasement of the wear rate.

石墨化度较高试样的表面能够形成一层光滑、致密的润滑膜，从而降低其磨损率；

As a complete unit, the effect of sol-impregnation treatment on the sliding behavior of composite with high graphitization is higher than that of the composite with low graphitization.

石墨化度高的材料的摩擦行为受浸渍溶胶的影响高于石墨化度低的材料。

graphitization temperature

石墨化温度

Effect of graphitization temperature and composition of doped silicon on the conductive properties and microstructure of recrystallized graphite

石墨化温度及掺硅组分对再结晶石墨传导性能及微观结构的影响

A TEST FOR CONTACT MEASUREMENT OF TEMPERATURE IX GRAPHITIZATION FURNACE

石墨化炉接触式测温试验

degree of graphitization

石墨化程度

Keywords graphite fibers;graphitization;radio frepuency direct heating method;

石墨纤维;石墨化;射频直热法;

The influences of different binder contents on material properties(density,resistivity,graphitization degree) were studied,and the microstructures were observed by SEM.

研究了粘结剂质量分数对材料性能(密度、电阻率、石墨化度)的影响,用扫描电镜观察了材料断口的微观形貌。

The results show that there is definite relationship between velocity and aging time.With the graphitization increasing, the velocity is decreasing according to the index law.

研究结果表明：随着石墨化程度的加剧，超声波速度随时效时间按照指数规律递减。

Keywords siliconizing;graphitization;carbon fiber;silicon carbide;

硅化处理;石墨化;炭纤维;碳化硅;