etchant是什么意思   etchant怎么读

etchant单词基本解析：

etchant变化用词：

etchant英英释义：

etchant中文词源：

etchant用法和例句：

etchant

1) device type: structure of the device is also an Etchant characteristics of one of the factors.

1）摆撤的典范榜样：摆撤的布局步地也是不不对蚀刻液共性的感化次给身分之一。

QUICK MEASUREMENT OF COPPER IN THE WASTE FeCl_3 ETCHANT WITH THE (BCO) SPECTROPHOTOMETRIC METHOD

BCO分光光度法快速测定含铜三氯化铁蚀刻废液中的铜

EPW etchant

EPW腐蚀液

HCl-H2SO4 etchant solutions

HCl-H2SO4腐蚀体系

Keywords ferric chloride;waste etchant;nickel;comprehensive utilization;

三氯化铁;蚀刻废液;镍;综合利用;

Perchloride of iron used to etch gravure cylinders. Alernative term: etchant.

中义腐蚀凹版辊筒的高氯酸铁。

Thesilicon - rich layer is etched by BOE etchant and photolithographicprocedure are being described initiately in this paper.

作者首次描述利用常规光刻技术,用BOE腐蚀液刻蚀双层氧化硅层。

INFLUENCE OF ETCHANT ON RESEARCHING THE MICROSTRUCTURE OF CrMo STEEL

侵蚀剂对研究CrMo钢组织的影响

flat etchant

光亮微蚀剂

Keywords selective separation of copper;cleaner production;PCB;ammoniacal etchant;ion exchange membrane-electric deposition;reuse;

关键词选择性回收铜;清洁生产;PCB;碱性腐铜液;离子膜-电沉积;循环再生;

chemical etchant

化学腐蚀剂

Keywords Printed circuit board;Metals coating;Etchant;

印制板;金属镀层;浸蚀剂;

Copper Etch: The exposed copper is removed through an etching process, while the plated tin acts as a resist-protecting the plated copper from the etchant.

去锡：除去镀锡层，显现出线路部分的铜线。（铜线由三层构成：基铜层、沉铜层和电镀铜层）

Keywords hydrogen peroxide;flat etchant;printed circuit board（PCB）;roughness;glossness;

双氧水;光亮微蚀剂;印制板（PCB）;粗糙度;光泽度;

Keywords anisotropic etching;convex corner undercutting compensation;KOH etchant;

各向异性腐蚀;凸角补偿;氢氧化钾腐蚀液;

At the same time copper elongation, crystallization structure would amount to an Etchant characteristics of direct impact.

同时铜的延伸率、暗地结晶布局等，城市构不败不不对蚀刻液共性的间接感化。

COMPREHENSIVE UTILIZATION OF WASTE FERRIC CHLORIDE ETCHANT CONTAINING NICKEL

含镍三氯化铁蚀刻废液的综合利用

Investigation of Removing Nickel in Waste Ferric Chloride Etchant

含镍三氯化铁蚀刻废液除镍研究

The size of etched pits fined with increasing frequency in AC-etching.When the temperature of etchant increased, the frequency that performed excellent capacitance must be raised.

在低压电蚀方面，若电蚀频率愈高，所形成之腐蚀孔洞愈小，而当温度增加时，要达到最佳静电容量之频率也必须跟著升高。

It is also used as the etchant for etching Aluminum and Silicon Nitride film in semi-silicon IC.

在硅平面晶圆集成电路生产中，用于铝及氮化硅的蚀刻；

Injury may result if the etchant is allowed to remain on the skin or mucosa for extended periods of time.

如果延长酸蚀剂保留在皮肤或粘膜上的时间则会引起伤害。

If the etchant is accidentally splashed into the eye, flush with copious amounts of water and seek medical attention immediately.

如果意外的溅到眼睛，立即用大量的水冲洗并寻求医疗帮助。

Experiments further show that the continuous regeneration of acidic copper etchant can be achieved and a high cop...

实验进一步证实,一套以BDD电极为核心的装置可以实现蚀铜液连续再生,并能维持高蚀铜速度。

The polished InP substrate is put in the dense etchant of HCl,a etched groove pattern can be observed on the polished surface,It can be found that the orientation of the etched grooves is coincided with[110]on(001) InP.

将去掉机械划痕的 InP 衬底放入浓 HCl,发现腐蚀出的条形沟方向是和片子的[110]方向一致。

Schell etchant

帅尔侵蚀液

spent ammoniacal etchant

废碱性蚀刻液

etchant resist

抗蚀膜

polishing etchant

抛光用腐蚀剂

method of removing nickel in waste ferric chloride etchant from electronic shadow mask factory was disclosed in this paper.

本文研究了彩色显像管用荫罩生产厂家所产生的含镍三氯化铁蚀刻废液中镍的去除。

Transene Co. Inc., "Materal safety data sheet for aluminum etchant type A", Transene Co. Inc., Rowley, MA, 1987.

李世鸿，"积体电路制程技术"，五南图书出版公司，民国87年10月。

gas etchant

气体腐蚀剂

ammonium fluoride etchant

氟化铵浸蚀剂

wet etchant

液体腐蚀剂

Keywords Emulsion liquid membrane Printed circuit board spent etchant Cupric ions;

液膜法;电路板刻蚀废液;铜离子;

Gallium Phosphide Etchant For Light Emitting Diodes

用于发光二级管的磷化镓蚀刻剂

Silver Etchant for Microelectronics Circuits

用于微电子电路中的银蚀刻剂

TRANSETCH-N--Selective Etchant for Gallium Nitride, Silicon Nitride or Aluminum Oxide Films

用于氮化镓,氮化硅,氧化铝薄膜的选择性蚀刻剂

silicon etchant

硅腐蚀剂

Keywords Duralumin alloy;Etchant;Transgression of gas;Mopping;Time for etching;

硬铝合金;侵蚀剂;气体逸出;擦拭;侵蚀时间;

The best compositions of the polishing solution for the crystal surface and of the etchant for revealing dislocations are given.

确定了所选定的位错侵蚀剂的侵蚀规范;此侵蚀剂对晶面无选择性,能显示出刃型和螺型位错,以及“新”、“旧”位错。

spent basic etchant

碱性蚀刻液

Studying on Alkaline Copper Etchant

碱性蚀刻盐的研制

Keywords centrifugal extractor;centrifugal extraction-stripping process;copper recovery;regeneration of spent etchant;

离心萃取器;离心萃反联合工艺;铜回收;蚀刻液再生;

Chapter 5 describes materials for experiment and experimental procedures, which focuses on comparing the different effects of two etchant.

第5章介绍了试验材料和试验方法，对两种侵蚀剂的效果进行了比较。

Confined etchant layer technique

约束刻蚀剂层技术

in the textiles industry for delinting of cotton seeds and the reclamation of wool, gasoline refining, the manufacture of organic and inorganic chlorinated compounds, and in the manufacture of semiconductors as an etchant.

纺织工业中用于除棉籽和毛线的回收、汽油精制、有机和无机氯化合物的生产、半导体生产中作为蚀刻剂。

In order to achieve the ideal Etchant best level will have to take full advantage of the capabilities of the etching machine to ensure that the mobility solution.

给到达抱负的蚀刻液的最好状况不离给充足诳骗蚀刻机的功用，保证溶液的变不静性。

Rosenhain's etchant

罗森海因浸蚀剂

Which is at the development stage to nitric acid as the main Etchant can virtually no side erosion problems, etching the wires of a side-wall after nearly vertical.

而侧处在斥地阶段的以硝酸为主的蚀刻液可以到达实在不有有侧蚀题目，蚀刻后的导线侧壁挨近笔直。

etchant regeneration system

腐蚀剂再生装置

The etchant penetrates between the fine grains to etch the plate forming countless tiny cells that print in a soft texture.

腐蚀剂在微粒间渗入，把版面腐蚀，造成无数小窝，印出一个柔和纹理。

etchant gas

腐蚀气体

etchant solution

腐蚀溶液

Sirtl etchant

色托侵蚀液

Keywords Lix54-100;spent etchant;copper recover;regeneration;

蚀刻废液;铜回收;再生;

anisotropic etchant

蛤异性腐蚀剂

This is a subtractive process that uses photolithographic techniques to define the aperture pattern, and then applies an etchant to form the apertures simultaneously from both sides of the stencil.

这是一个反工艺，它应用成像技术来决定孔型。然后，同时从钢网的两边腐蚀成孔。

selective etchant

选择腐蚀剂

More often, all of the materials exposed to the etchant have a finite etch rate

通常，所有暴露在刻蚀剂中的材料都具有一定的刻蚀速率。

Comparing with different chemical etchant, FPM(HF-H2O2-H2O Mixing) can reach a high selectivity of Sion/SiO2.

通过不同腐蚀药液的比较，结果表明，FPM(HF- H2O2-H2O混合液)能够达到氮氧化硅对氧化硅较高的选择比。

It is a common way to alter the etching rate by changing the material of sacrificial layer, concentration of etchant, temperature or structure of sacrificial layer.

通过改变牺牲层材料、腐蚀液浓度、温度和牺牲层结构来改变腐蚀速率是常用的方法。

The effects of composition of etchant, etching temperature and etching time on etching rate are also investigated.

通过研究刻蚀剂组份、刻蚀时间、刻蚀温度对刻蚀速率的影响,可提供合适的刻蚀剥层方案。

Cupric Chloride Etchant Compare with Alkaline Ammonia Etchant

酸性氯化铜蚀刻液与碱性氯化铜蚀刻液比较

Development and Application of Cupric Chloride Etchant

酸性蚀刻剂的开发与应用

acidic etchant

酸性蚀刻液

In this paper,the quick measurement of the copper with dicyclohexanonexalyl dihydrazone (BCO) spectrophotometric method in the process of the overall utilization of waste FeCl 3 etchant was studied.

采用双环已酮草酰二腙 (简称BCO)光度法 ,对含铜三氯化铁蚀刻废液综合利用过程中铜的快速测定进行了研究。

metallographic etchant

金相腐蚀液

Keywords aluminium shape;mat forming treatment;alkalline etchant;recovery and use;

铝型材;表现处理;碱蚀液;回收;利用;

Distance: the so-called distance refers to the nozzle to the plate surface, which is the distance from the Etchant spray to the substrate surface distance, this is very important.

间隔：所谓间隔是指喷咀到不活背的间隔，也不离是蚀刻液喷淋到基不活暗地的间隔，这是不入格次给的。

Resist: Coating material used to mask or to protect selected areas of a pattern from the action of an etchant, solder, or plating.

阻剂:用来选择性保护某图形区域免受蚀刻剂,焊料或电镀影响的涂层材料。

During copper etching,the cuprous ion concentration in the etchant would increase which causes an etching rate reduction.

随着蚀铜过程的进行,蚀铜液中的一价铜离子浓度不断增加,造成蚀铜液的蚀铜能力下降。

During the process of copper etching, the concentration of cuprous ion gradually builds up in the etchant, resulting in the reduction of copper etching rate.

随著蚀铜过程的进行，蚀铜液中的一价铜离子浓度不断增加，造成蚀铜液的蚀铜能力下降。

The room to place blower should be in dry condition with excellent ventilation,no etchant gas and can prevent from drench and solarization.

风机的存放空间应干燥通风，无腐蚀气体，并能防止雨淋和日晒！